REFERENCE EVAPOTRANSPIRASTION (ETo)

Slides:



Advertisements
Presentasi serupa
Perth Chart & Critical Path Method
Advertisements

METHODS TO DETERMINE CROP WATER REQUIREMENT
Universitas islam Riau
Oleh: Evi Kurniati, STP., MT. PERHITUNGAN KEBUTUHAN AIR TANAMAN Kebutuhan air tanaman = tingkat evapotranspirasi untuk mempertahankan pertumbuhan tanaman.
KONSISTENSI TANAH.
Common Effect Model.
Validitas & Reliabilitas
Rumus-rumus ini masihkah anda ingat?
ANALISIS INSTRUMEN PENELITIAN 1.UJI VALIDITAS 2.UJI RELIABILITAS.
Testing Implementasi Sistem Oleh :Rifiana Arief, SKom, MMSI
Inventory Management. Introduction Basic definitions ? An inventory is an accumulation of a commodity that will be used to satisfy some future demand.
Pertemuan 08 Modeling Business Processes Matakuliah: M0034 /Informasi dan Proses Bisnis Tahun: 2005 Versi: 01/05.
Pendugaan Parameter Proporsi dan Varians (Ragam) Pertemuan 14 Matakuliah: L0104 / Statistika Psikologi Tahun : 2008.
Population and sample. Population is complete actual/theoretical collection of numerical values (scores) that are of interest to the researcher. Simbol.
Masalah Transportasi II (Transportation Problem II)
Bab 12 Gelombang Elektromagnetik
1 Pertemuan 10 Fungsi Kepekatan Khusus Matakuliah: I0134 – Metode Statistika Tahun: 2007.
Pertemuan 03 Ukuran Penyimpangan (Variasi)
1 Pertemuan 22 Analisis Studi Kasus 2 Matakuliah: H0204/ Rekayasa Sistem Komputer Tahun: 2005 Versi: v0 / Revisi 1.
ANALISIS EKSPLORASI DATA
1 Pertemuan 25 Matakuliah: I0044 / Analisis Eksplorasi Data Tahun: 2007 Versi: V1 / R1 Analisis Regresi Ganda (I) : Pendugaan Model Regresi.
Pertemuan 07 Peluang Beberapa Sebaran Khusus Peubah Acak Kontinu
1 HAMPIRAN NUMERIK SOLUSI PERSAMAAN LANJAR Pertemuan 5 Matakuliah: K0342 / Metode Numerik I Tahun: 2006 TIK:Mahasiswa dapat meghitung nilai hampiran numerik.
Shear Joints under eccentric loads Joints can and should be loaded in shear so that the fasteners see no additional stress beyond the initial tightening.
9.3 Geometric Sequences and Series. Objective To find specified terms and the common ratio in a geometric sequence. To find the partial sum of a geometric.
Keuangan dan Akuntansi Proyek Modul 2: BASIC TOOLS CHRISTIONO UTOMO, Ph.D. Bidang Manajemen Proyek ITS 2011.
Smoothing. Basic Smoothing Models Moving average, weighted moving average, exponential smoothing Single and Double Smoothing First order exponential smoothing.
The Three Principle Cooking Methods Dry Heat Moist Heat Combination Method.
Ambient Noise Measurement and Characterization of Underwater Acoustic Channel in Surabaya Bay Tri Budi Santoso, Endang Widjiati, Wirawan, Gamantyo Hendrantoro.
Mekanika Fluida Minggu 01
Thermodinamika FAKULTAS TEKNOLOGI INDUSTRI UNIVERSITAS MERCU BUANA
REVENUE RECOGNITION Revenue Recognition Current Revenue Revenue
Memahami Terminology Instrumentasi pada pengolahan migas
HTML BASIC (Contd…..) PERTEMUAN KEDUA.
Mekanika Fluida Minggu 04
MEKANIKA TEKNIK TI KESEIMBANGAN BENDA TEGAR
VERIFIKASI ALAT UKUR SMK Negeri 13 Bandung.
KOMUNIKASI DATA Materi Pertemuan 3.
07/11/2017 BARISAN DAN DERET KONSEP BARISAN DAN DERET 1.
Introduction to Micro Irrigation Systems
Kompetensi Umum Mahasiswa memahami definisi sensor dan aktuator
Cartesian coordinates in two dimensions
PERENCANAAN ERA HADI ALIKODRA 2011.
III6. Penguapan air A. Definisi
Pengujian Hipotesis (I) Pertemuan 11
Matakuliah : I0014 / Biostatistika Tahun : 2005 Versi : V1 / R1
Image Enhancement –Spatial Filtering
PENDUGAAN PARAMETER Pertemuan 8
Pohon Keputusan (Decision Trees)
Two-and Three-Dimentional Motion (Kinematic)
Gerund (the -ing form) For example: Kita tidak bisa makan tanpa minum
Pendugaan Parameter (II) Pertemuan 10
13-1 Lecture slides to accompany Engineering Economy 7 th edition Leland Blank Anthony Tarquin Chapter 13 Breakeven and Payback Analysis © 2012 by McGraw-Hill.
Cost-Volume-Profit Analysis
Eksperimen Satu Faktor: (Disain RAL)
METHODS TO DETERMINE CROP WATER REQUIREMENT
Master data Management
Pertemuan 4 CLASS DIAGRAM.
Bab 12 Gelombang Elektromagnetik
Self-Organizing Network Model (SOM) Pertemuan 10
Pertemuan 21 dan 22 Analisis Regresi dan Korelasi Sederhana
Physical Property Of Corn Seed
Simultaneous Linear Equations
VCD102 - Gambar Desain Desain Komunikasi VIsual
CLIMATE CHANGE AND AGRICULTURE. Group 11 Dedi Candro P ( ) Made Agus W ( ) Safitri Ambar S ( ) Youngky S ( ) Amin K ( )
Al Muizzuddin F Matematika Ekonomi Lanjutan 2013
HANDLING RUSH PRESIDENT UNIVERSITY NURLAELA RIZKINA.
A SHORT ESSAY OF CIVIL ENGINEERING BY : ALFATIHATU RAHMI CIVIL ENGINEERING ENGINEERING FACULTY ANDALAS UNIVERSITY PADANG.
SHEET PILE STRUCTURES. Topic: General Types of Sheet Pile Lateral Pressure Diagram Cantilever Sheet Pile.
Wednesday/ September,  There are lots of problems with trade ◦ There may be some ways that some governments can make things better by intervening.
Transcript presentasi:

REFERENCE EVAPOTRANSPIRASTION (ETo) Penman Method Climatic data required are : mean teperature (0C), mean relative humidity (RH in %), total windrum ( U in km/day at2 m height) and mean actual sunshine duration (n in hour/day) or mean radiation (Rs or Rn equivalent evaporation in mm/day). Also measured or estimated data in mean maximum relative humidity (RHmax in %) and mean daytime windspeed (Uday in m/sec at 2 m height) must be available. Eto = c [ W . Rn + ( 1 – W) . F (U). (ea – ed)]

Where ; (ea – ed) = vapour pressure deficit i.e. the difference between saturation vapour pressure (ea) at Tmean in mbar (Table 9) and actual vapour pressure (ed) in mbar where ed = ea.RH/100 f (U) = wind function of f(U) = 0.27 (1 + U/100) with U in km/day measured at 2 m height Rn = total net radiation in mm/day or Rn = 0.75Rs – Rnl where Rs is obtained from Rs = (0.25+0.5 n/N)Ra. Ra is extra-terrestrial radiation in mm/day (table 10), n is mean actual sunshine duration in hour/day and N is maximum possible sunshine duration in hour/day (Table 11). Rnl is net longwave radiation in mm/day and is function of temperature, f(T), of actual vapour pressure, f(ed) and sunshine duration, f(n/N), or Rnl = f(T).f(n/N).f(ed) (Table 12, 13, 14) W = temperature and altitude dependent weighting factor (table 15) c = adjustment factor for ratio Uday/Unight, for Rhmax and for Rs (Table 16)

Example : Given : Location 30 oN ; altitude 95 m; July ; Tmean 28.5 oC; Rhmean 55% ; Umean 232 km/day ; n mean 11.5 hour/day ; (Rhmax 80%, Uday 3 m/sec, Uday/Unight 1.5). Calculation : ea T = 28.5 oC Table 9 38.9 mbar ed ea . RH/100 calc 21.4 mbar ea – ed calc 17.5 mbar f(U) 0.27(1+U/100) ; U = 232 km/day calc 0.9 Ra 30 oN, July Table 10 16.8 mbar N 30 oN, July Table 11 13.9 hour/day Rs (0.25+0.50 n/N)Ra calc 11.2 mm/day Rnl f(T).f(ed).f(n/N) Table 12,13,14 1.8 mm/day Rn 0.75Rs – Rnl calc 6.6 mm/day W T = 28.5 oC ; 95m Table 15 0.77 c Rhmax 80% ; Rs 11.2; Uday/Unight 1.5 Table 16 1.01 ETo c[W.Rn + (1-W).f(U).(ea-ed)] calc 8.8 mm/day

2. Radiation method ETo = c (W . Rs) Climate data required are mean temperature (T in oC) and mean actual sunshine duration (n in hour/day) or mean incoming shortware radiation (Rs in mm/day) equivalent evaporation). Estimated values of mean relative humidity (RH in %) nd mean daytime windspeed (Uday in m/sec at 2 m height) ETo = c (W . Rs) Where : Rs = measured mean incoming shortware radiation in mm/day or is obtained from Rs = (0.25 + 0.50 n/N) Ra where Ra is extra – terrestrial radiation in mm/day (Table 10), N is maximum possible sunshine duration in hour/day (table 11) and n is measured mean actual sunshine duration in hour/day W = temperature and altitude dependent weighting factor (Table 15) c = adjustment factor made graphically on W. Rs using estimated values of Rhmean and Udaytime (figure 1).

Example : Given : Location 30 oN, altitude 95 m; July; Tmean 28.5 oC; n mean 11.5 hour/day; Uday mean = moderate (2 to 5m/sec); RHmean = medium (about 55%) Calculation : Ra 30 oN ; July Table 10 16.8 mm/day N 30 oN ; July Table 11 13.9 mm/day Rs (0.25 + 0.50 n/N) Ra calc 11.2 mm/day W T = 28.5 oC ; 95m Table 15 0.77 W.Rs calc 8.6 mm/day ETo RH 55 %; U = 2 to 5 m/sec Fig.1 8.4 mm/day

3. Pan Evaporation Method Data required are mean pan evaporation (Epan in mm/day), estimated values mean relative humidity (RH in %) and mean windrum (U in km/day at 2 m height) and information on whether the pan is surrounded by a cropped or dry fallow area. ETo = kpan. Epan Where : Epan = evaporation in mm/day from an unscreened class A evappotarion pan k pan = pan coeeficient (Table 17)

Example : Given : July ; E class A pan 11.3 mm/day; Rhmean = medium ; Umean = moderate; pan surronded by cropped area of several hectares. Calculation : kpan RH = medium; U = moderate; cropped Table 17 0.75 ETo kpan. Epan calc 8.5 mm/day

Pengukuran Evaporasi secara Langsung Contoh : Pan Evaporimeter berupa bak atau panci yang mempunyai ukuran tertentu (tinggi ± 2,5 dm dan diameter ± 12,2 dm) yang terbuat dari bahan plat besi atau seng, yang didalamnya terdapat STILL WELL dengan dilengkapi jarum penunjuk, gambar. Keterangan : Bak/Panci Still Well Jarum Penunjuk Beton Penyagga 1 2 3 4

Cara Pengamatan : Bila tidak terjadi hujan, angka penguapan dapat langsung diukur dengan cara penambahan air setinggi jarum penunjuk dimana sebelumnya (waktu pagi) air selalu tepat pada jarum penunjuk Bila terjadi hujan tapi belum sampai melampui jarum penunjuk, maka penambahan air tetap diberikan hingga tepat di permukaan jarum. Dan angka penguapan : jumlah curah hujan di tembah penambahan air. Jika air melampui batas jarum, maka penguapan sama dengan curah hujan dikurangi dengan pengurangan air hingga batas jarum penunjuk Bila hujan sangat lebat sehingga air tumpah dari bak, maka penguapan tidak bisa dihitung, sehingga perlu digunakan alat-alat lain seperti Piche.

CROP COEFFICIENT (kc) Infromation required on crops is : The date of sowing The length of total growing season, including The duration of initial stage (germination to 10 percent ground cover) The duration of crop development stage (from 10 percent to 80 percent ground cover) The duration of the mid-season stage (from 80 percent ground cover to start of ripening) The duration of late season stage (fro start of ripening to harvest) General informatio n on crop development stages is given for different crops in Part B. For crop coefficients see Table 18. climate data required for the selection of kc values are windspeed and humidity. Example : Given : Maize; planted 1 May; harvested 31 August; initial stage is 20 days ; development stage 35 days; mid-season stage 40 days; late season stage 28 days; windspeed is light to moderate; minimum mean relative humidity is low. Calculation : From Part B, Maize, or from Table 18: kc May = 0.4; June = 0.75; July = 1.15; August = 0.85

MAXIMUM EVAPOTRANSPIRATION (ETm) Data required are monthly mean ETo in mm/day and the kc values for the given crop over each 30 or 10-day periode. Maximum evapotranspiration ETm = kc. Eto Example Given : Climate data collected at station located within an irrigated area : May June July August ETo mm/day 8.9 9.4 8.8 7.6 kc 0.4 0.75 1.15 0.85 Calculation ETm mm/day 3.6 7.1 10.1 6.5 mm/month 110 212 314 201 840