MAKE THE GYPSUM MOLD FOR ONE-SIDE IMPRESS TECHNIQUE 3. MAKING THE GYPSUM MOLD BASIC COMPETENCY MAKE THE GYPSUM MOLD FOR ONE-SIDE IMPRESS TECHNIQUE FOR CLASS XI SEMESTER.1 Seni Kerajinan dan Pariwisata

STUDENTS ARE ABLE TO MAKE GYPSUM MOLD FOR ONE-SIDE IMPRESS TECHNIQUE LEARNING OBJECTIVIES STUDENTS UNDERSTAND THE PROCESS OF MAKING THE MOLD FOR ONE-SIDE IMPRESS TECHNIQUE STUDENTS ARE ABLE TO MAKE GYPSUM MOLD FOR ONE-SIDE IMPRESS TECHNIQUE Seni Kerajinan dan Pariwisata

Seni Kerajinan dan Pariwisata COMPETENCY MAPPING COMPETENCY STANDARD Making the gypsum mold BASIC COMPETENCY BASIC COMPETENCY BASIC COMPETENCY Preparing the gypsum mass to make the mold Make the gypsum mold for one-side impress technique Make the gypsum mold for two-or-more side slip technique Seni Kerajinan dan Pariwisata

Seni Kerajinan dan Pariwisata LEARNING MATERIALS One side mold is a mold that has only one surface. It can be done using either concave or convex mold. Model Mould Product Mould Seni Kerajinan dan Pariwisata

Seni Kerajinan dan Pariwisata Gambar penampang cetakan tekan yang ada sangkutannya LEARNING MATERIALS Picture of concave mold and its product Picture of convex mold and its product. Picture of unhooked concave mold. Picture of hooked mold. Seni Kerajinan dan Pariwisata

THE PROCESS OF MOLD MAKING Tools brush Wooden casting box Bowl Panel base Ribbon Tool Seni Kerajinan dan Pariwisata

THE PROCESS OF MOLD MAKING Materials Separator made from the mixture of water, vegetable oil and detergent, then heat it. Water Gypsum/plaster Seni Kerajinan dan Pariwisata

Seni Kerajinan dan Pariwisata WORKING STEPS Put the model on the panel base, then nub with separator so that it will be easily released.   2. Install the panel base on the four side of the model with 4 cm distance from the model. Then put the flexible clay on the connected part to avoid the flowing gypsum slip.   Seni Kerajinan dan Pariwisata

Seni Kerajinan dan Pariwisata WORKING STEPS 3. Make gypsum slip to make mold. 4. Pour the slip on the model carefully so that all the model surface covered thoroughly and let it harden. Seni Kerajinan dan Pariwisata

Seni Kerajinan dan Pariwisata THE WORKING STEPS 5. Open the panel base after the gypsum harden then trim the surface. 6. Release the model from the mold then clean and dry it. 7. A ready to use gypsum mold Seni Kerajinan dan Pariwisata

PLEASE LEARN THE NEXT COMPETENCY COMPETENCY LINK PLEASE LEARN THE NEXT COMPETENCY Make the gypsum for two-or-more impress technique Seni Kerajinan dan Pariwisata

Seni Kerajinan dan Pariwisata REFERENCE Hall. Morgen. 1997. The Potter’s Primer. A step by Step. Apple Press. London Mattison, Steve .1998, . Ceramics, Step BY Step Instructions for 18 delightful projects, Apple Press. London. Tim Studio Keramik. 2007. Modul Pendidikan Dan Pelatihan, P4TK Seni Dan Budaya Yogyakarta. Wahyu Gatot Budiyanto, 2008. Kriya Keramik Untuk Sekolah Menengah Kejuruan , BSE , Jilid. 1,2,3 .Direktorat Pembinaan Sekolah Menengah Kejuruan, Jakarta . Seni Kerajinan dan Pariwisata

SEE YOU AT THE NEXT COMPETENCY Florentina Sri Wartini, S.Pd THANK YOU SEE YOU AT THE NEXT COMPETENCY Written by Nana Turmono, S.Pd. Translated by Florentina Sri Wartini, S.Pd Seni Kerajinan dan Pariwisata