OPERATED TOOL AND PLANTS PRODUCTION ENGINE

Presentasi berjudul: "OPERATED TOOL AND PLANTS PRODUCTION ENGINE"— Transcript presentasi:

1 OPERATED TOOL AND PLANTS PRODUCTION ENGINE
B.Indonesia

2 MATTER SCOPE 1 Identify tool and tractor engine appropriate the function 2 Explain manual tool procedure and tractor engine 3 Care tool and tractor engine

3 IDENTIFY TOOL AND TRACTOR ENGINE APPROPRIATE THE FUNCTION
Motor Mainspring. Mainspring kind often worn diesel motor diesel, but there also that use petrol motor or kerosene (kerosene). Power that produced less than 12 hp, by using one cylinder.

4 Sketch And Transmission (Energy Router)
Kerangka berfungsi sebagai tempat kedudukan motor penggerak, transmisi dan bagian traktor lainnya. Bagian traktor dikaitkan dengan kerangka dengan menggunakan beberapa buah baut pengencang.

5 Lever Rein/Kontrol Rein lever levers that used to restrain the way tractor. To simplify the way operational, hand tractor there many rein levers. But so this rein lever quantity will cause tractor will be heavier, and the price more expensive. For that now many is produceding tractor only being equiped with beberap rein lever. The aim so that tractor is light, and the price is cheaper. Although tractor ability Be limited. Speed one to pirate soil mechanically rotary Speed two to pirate soil with singkal/disc plough Speed three to pirate rice field soil that stagnate Four velocity to walk at beaten path Speed five and six to interesting trailer/cart Retreat one used at the (time) of operator walks Retreat two used at the (time) of operator rises at trailer/gerobak

6 Lever Reins

7 Speed one to pirate soil mechanically rotary

8 Speed two to pirate soil with singkal/disc plough

9 Speed three to pirate rice field soil that stagnate

10 Coupling Lever Principal
Principal coupling lever functioneds to operate principal coupling. When is lever removed on course pair/on, so motor energy will be continued to tooth persneleng.

11 lever perseneleng engine rotary
Lever Persneleng Engine Rotary Functioned As Speed Regulator Axis Roll PTO.

12 lever perseneleng Ruder
There two rudder coupling levers in every hand tractor, each in right side and left. This lever is used to operate rudder coupling (right and left). When does right rudder coupling lever depressed, so tooth rotation persneleng is not tied on right wheel axis.

13 HAND TRACTOR PARTS FUNCTION
Moldboard plow functioned to cut and turn soil so that existing plants mempermukaan sunk soil and decay Pattern that used with plough singkal: side pattern, pattern middle, spiral pattern, pattern returns meeting Plough rotary functioned smash and turn soil

14 MANUAL PROCEDURE FROM TOOL AND TRACTOR ENGINE
Investigate tractor Water volume cheque refrigerators, fuel, oil, tyre pressure and bold Bring to life tractor Twist crank Release decompression lever Run tractor Run tractor with rubber wheel Tooth input and discharge koopling End activity Turn Off traktor Cased up all devices wash and tractor cheque

15 MERAWAT ALAT DAN MESIN TRAKTOR
Cuci dan bersihkan kotoran yang melekat pada setiap akhir kerja Keringkan traktor dan berilah minyak pelumas pada bagian traktor yang bergerak Penuhi bahan bakar setelah bekerja Ganti oli mesin secara berkala

16 TIM AGRIBISNIS PEMBIBITAN DAN KULTUR JARINGAN TANAMAN
Terima kasih Disusun Oleh : TIM AGRIBISNIS PEMBIBITAN DAN KULTUR JARINGAN TANAMAN SMKN 2 PANDEGLANG