DR.IR DIAR FACHMI R CHAIDAR.,MT,CISCP

Presentasi berjudul: "DR.IR DIAR FACHMI R CHAIDAR.,MT,CISCP"— Transcript presentasi:

1 DR.IR DIAR FACHMI R CHAIDAR.,MT,CISCP
GOODS INSPECTION “ DEFFECT & FLOW AT GOODS INSPECTION POLTEK POS INDONESIA DR.IR DIAR FACHMI R CHAIDAR.,MT,CISCP

2 IMPORTANT THINGS IN GOODS INSPECTION
The inspection and measurement process helps your organization to: Improve incoming material quality; Reduce lead times;

3 IMPORTANT THINGS IN GOODS INSPECTION
Help achieve uninterrupted supply; Enhance pricing competitiveness; Improve customer service;

4 IMPORTANT THINGS IN GOODS INSPECTION
Strengthen and protect your brand image and reputation; Improve the performance of your suppliers;

5 IMPORTANT THINGS IN GOODS INSPECTION
Drive continued improvement of your quality systems; Protect sales revenue by helping to prevent late shipments, poor quality, wasted materials, rework.

6 QUALITY ENGAGEMENT

7 GOODS INSPECTION IN GENERAL FLOW

8 GOODS INSPECTION PROCESS
QUALITY INSPECTION PROCESS IN ELECTRONICS COMPANY

9 GOODS INSPECTION PROCESS

10 RAW MATERIAL TESTING PROCESS

11 FINISH GOODS INSPECTION

12 DEFFECT TYPE IN GOODS INSPECTION
CRITICAL MAJOR MINOR EFFECT TO CUSTOMER

13 DEFFECT TYPE IN GOODS INSPECTION
1. CRITICAL Setiap kondisi yang ditemukan dengan kemungkinan menyebabkan kecelakaan, bahaya untuk Customer atau menimbulkan potensi menganggu kehidupan atau keselamatan bagi Customer sebagai si pemakai /pembeli produk, jasa tersebut.

14 DEFFECT TYPE IN GOODS INSPECTION
2. MAJOR Setiap kondisi yang berpotensi menggangu produk yang ditawarkan & peningkatan penjualan atau faktor yang mempengaruhi terhadap kesesuaian, fungsi yang dirasakan kurang oleh si pemakai yang berpotensi produk tersebut dikembalikan atau atau adanya klaim

15 DEFFECT TYPE IN GOODS INSPECTION
3. MINOR – Suatu kondisi yang mungkin menyebabkan ketidak senangan si Pelanggan terhadap produk atau layanan yang mereka terima tetapi tidak mempengaruhi terhadap penjualan atau fungsi produk dari yang mereka pakai.

16 Sample sizes are selected for each component identified in the criteria for inspection. Acceptable quality levels, AQLs, are identified for determining an accept or reject result. A general example of a pre-shipment inspection on a lot of 1,000 packaged units might include: Packaging – Special Level III (13 Units) Drop-testing is often conducted to check the integrity of the unit and/or master carton packaging integrity. In addition, the condition of the cartons and labeling accuracy is evaluated. Appearance & Workmanship -General Level II (80 Units) Examples of appearance and workmanship usually include making sure samples are free of cosmetic defects such as scratches or dents and that all components and accessories are included. Function & Performance – Special Level 1 (5 Units) Examples of function and performance might include assembly or electrical testing, as applicable.

17 DEFFECT TYPE IN GOODS INSPECTION
Critical defects – One critical defect noted results in a reject result. Major defects – 2.5 On a sample of 80 units, up to five major defects would be acceptable. Minor defects – 4.0 On a sample of 80 units, up to seven minor defects would be acceptable.

18 SOAL UJIAN Konsep Reduce time dihubungkan dengan Goods Inspection Konsep Quality. Mnakah yang lebih penting : Citra, Keberadan

19

20