Making a wooden trestle

Presentasi berjudul: "Making a wooden trestle"— Transcript presentasi:

1 Making a wooden trestle
Doing the preparation for assembling a wooden trestle

2 Learning objectives : Students can calculate the needs of timber in accordance with the image of work. Students can prepare the component parts of the trestle. Students can prepare for the assembly easel. Konstruksi kayu

3 calculate the needs of the timber based on the image of work
To be able to calculate the needs of the timber need to know the size-stem size that will be used for the horse in accordance with the image of work. Konstruksi kayu

4 Table size timber for horse.
Teknologi dan Rekayasa

5 Prepare the parts of the trestle
The components that needs to be prepared are:         - Pull rod         - Foot bridge         - Pole horse         - Support the beam         - Beam clamp         - Beam gurden, rooftop, wall blocks, and row Description: In preparing the materials need to be above the stem-stem continuation, if needed bar which length exceeds the length in the trade. Konstruksi kayu

6 Prepare the place to assemble the trestle
To set up trestle scaffold required / support / desk penyetel a flat Konstruksi kayu

7 Prosedur perakitan kuda-kuda kayu
Selection type of horse Calculation of strength / dimensional rods for the trestle Preparation of materials in accordance with the results of the calculation Konstruksi kayu

8 Daftar Pustaka Soegihardjo,BAE Ilmu bangunan Gedung 2. Jakarta: Departemen Pendidikan dan Kebudayaan. Surowiyono, Tutu TW Dasar Perencanaan Rumah Tinggal. Jakarta : Saphodadi NV. Teknologi dan Rekayasa

9 Thank You Konstruksi kayu