KONDISI SOSIAL BUDAYA PADA MASA REVOLUSI FISIK ( )

Presentasi berjudul: "KONDISI SOSIAL BUDAYA PADA MASA REVOLUSI FISIK ( )"— Transcript presentasi:

1 KONDISI SOSIAL BUDAYA PADA MASA REVOLUSI FISIK (1945-1950)
Custom animation effects: floating petals (Difficult) Tip: For best results with the animation effects on this slide, choose a picture with an object that is made up of multiple parts, like the flower in this example. To reproduce the background effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. Right-click the slide and then click Format Background. In the Format Background dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 7.5”. In the Shape Width box, enter 10”. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Gradient fill, and then do the following: In the Type list, select Radial. Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). In the Transparency box, enter 40%. Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. In the Transparency box, enter 10%. Select the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Middle. Click Align Center. To reproduce the shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Lines, click Freeform (11th option from the left). On the slide, click points to trace an outline around a shape on the background picture (in the example above, one of the flower petals). Right-click the freeform shape and click Edit Points. To make the freeform shape more similar to the shape on the picture, right-click a place to include another point, and click Add Points. Drag the new point to follow the contour of the shape on the picture. To outline rounded edges of the shape on the picture, right-click a straight line segment, and click Curved Segment. Select the freeform shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then in the Line Color pane, select No line. Also in the Format Shape dialog box, click Fill in the left pane, and then in the Fill pane, select Slide background fill. Repeat the process in steps 1-5 to create six full-color shapes on the slide (in the example above, six flower petals from the same flower). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. On the slide, select the rectangle. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade, and then click OK. Under Modify: Fade, in the Start list, select After Previous. Under Modify: Fade, in the Speed list, select Medium. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, do the following: Click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Spin, and then click OK. Press and hold CTRL and select all of the freeform spin effects. Under Modify: Spin, in the Start list, select With Previous. Under Modify: Spin, in the Speed list, select Medium. Also in the Custom Animation task pane, do the following to edit each freeform shape spin effect: Select the first freeform shape spin effect, and then do the following: Under Modify: Spin, in the Start list, select After Previous. Under Modify: Spin, in the Amount list, in the Custom box, enter 360⁰, and then press ENTER. Also in the Amount list, click Counterclockwise. Select the second freeform shape spin effect, and then do the following: Under Modify: Spin, in the Amount list, in the Custom box, enter 30⁰, and then press ENTER. Also in the Amount list, click Clockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.3. Select the third freeform shape spin effect, and then do the following: Under Modify: Spin, in the Amount list, in the Custom box, enter 40⁰, and then press ENTER. Also in the Amount list, click Clockwise. Select the fourth freeform shape spin effect, and then do the following: Under Modify: Spin, in the Amount list, in the Custom box, enter 90⁰, and then press ENTER. Also in the Amount list, click Counterclockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.4. Select the fifth freeform shape spin effect, and then do the following: Under Modify: Spin, in the Amount list, in the Custom box, enter 90⁰, and then press ENTER. Also in the Amount list, click Clockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.5. Select the sixth freeform shape spin effect, and then do the following: Under Modify: Spin, in the Amount list, in the Custom box, enter 360⁰, and then press ENTER. Also in the Amount list, click Clockwise. Right-click the freeform shape spin effect, and then click Timing. In the Spin dialog box, on the Timing tab, in the Delay box, enter 0.6. In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, do the following: Click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink, and then click OK. Press and hold CTRL and select all of the grow/shrink effects (the final six effects in the list). Under Modify: Grow/Shrink, in the Start list, select With Previous. Under Modify: Grow/Shrink, in the Speed list, select Medium. Also in the Custom Animation task pane, do the following to edit each freeform shape grow/shrink effect: Select the first freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 40%, and then press ENTER. Also in the Size list, click Vertical. In the pane, drag the effect until it is third in the list of effects. Select the second freeform shape grow/shrink effect, and then do the following: Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 50%, and then press ENTER. Also in the Size list, click Horizontal. In the pane, drag the effect until it is fifth in the list of effects. Select the third freeform shape grow/shrink effect, and then do the following: In the pane, drag the effect until it is seventh in the list of effects. Select the fourth freeform shape grow/shrink effect, and then do the following: In the pane, drag the effect until it is ninth in the list of effects. Select the fifth freeform shape grow/shrink effect, and then do the following: In the pane, drag the effect until it is 11th in the list of effects. Select the sixth freeform shape grow/shrink effect, and then do the following: In the pane, drag the effect until it is 13th in the list of effects. In the Selection and Visibility pane, press and hold CTRL and select all of the freeform shapes. In the Custom Animation task pane, click Add effect, point to Motion Path, point to Draw Custom Motion Path, and then click Curve. On the slide, click five points to create a simple curved motion path, starting on the group of freeform shapes and ending off the right side of the slide. Double-click the final point to accept the motion path. Press and hold CTRL and select all of the freeform shape custom path effects (the final six effects in the list). Under Modify: Custom Path, in the Start list, select With Previous. Under Modify: Custom Path, in the Speed list, select Medium. Also in the Custom Animation task pane, do the following: Drag the first custom path effect until it is fourth in the list of effects. Drag the second custom path effect until it is seventh in the list of effects. Drag the third custom path effect until it is 10th in the list of effects. Drag the fourth custom path effect until it is 13th in the list of effects. Drag the fifth custom path effect until it is 16th in the list of effects. Drag the sixth custom path effect until it is 19th in the list of effects. Oleh : Kelompok 9

2 Berakhirnya Revolusi Fisik
PENDAHULUAN Kondisi masyarakat pada Awal Revolusi fisik Kondisi Sosial Budaya pada Masa Revolusi Fisik Berakhirnya Revolusi Fisik PENUTUP SmartArt custom animation effects: vertical picture list (Intermediate) To reproduce the SmartArt effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, double-click Vertical Picture List (fourth row, first option from the left) to insert the graphic into the slide. To create a fourth shape in the graphic, select the third shape from the top, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and then click Add Shape Before. Repeat this process to create a fifth shape. Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following: In the Height box, enter 6.38”. In the Width box, enter 7.91”. Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following: Click Align to Slide. Click Align Middle. Click Align Center. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, click each of the second-level bullets and then press DELETE until there are only three first-level bullets remaining (one for each shape). Enter text for each shape into the first-level bullets. On the slide, select the graphic. On the Home tab, in the Font group, select 14 from the Font Size list. Under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click More, and then under Best Match for Document click Moderate Effect (fourth option from the left). On the Design tab, in the Themes group, click Colors, and then click Civic. (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the theme colors will be applied to all of the slides.) Under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click Change Colors, and then under Colorful click Colorful Range – Accent Colors 3 to 4 (third option from the left). Click each of the five picture placeholders in the graphic, and then in the Insert Picture dialog box, select a picture and click Insert. Press and hold CTRL, and then select all five of the pictures on the slide. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles click Round Diagonal Corner Rectangle (ninth option from the left). Under SmartArt Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then do the following: Under Glow Variations, select Accent color 1, 5 pt glow (first row, first option from the left). Point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). Press and hold CTRL, and then select all of the larger rounded rectangles. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles click Round Diagonal Corner Rectangle (ninth option from the left). To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. On the slide, select the graphic. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade, and then click OK. Under Modify: Fade, in the Speed list, select Fast. Click Add Effect, point to Motion Paths, and then click Right. Under Modify: Right, do the following: In the Start list, select With Previous. In the Speed list, select Fast. On the slide, right-click the right motion path and then click Reverse Path Direction. Press and hold CTRL, and then select the two animation effects in the Custom Animation task pane. Click the arrow to the right of one of those effects, and then click Effect Options. In the Effect Options dialog box, on the SmartArt Animation tab, in the Group Graphic list, select One by One. Also in the Custom Animation task pane, do the following: Click the double arrows under each effect to expand the list of effects. Select the first animation effect (fade effect for the first rectangle). Under Modify: Fade, in the Start list, select With Previous. Also in the Custom Animation task pane, select the 11th animation effect (motion path for the first picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT to constrain the path to a straight horizontal line, and then drag the starting point to the left of the endpoint (red arrow). Drag the 11th effect until it is second in the list of effects. Drag the 12th effect (motion path for the first large rectangle) until it is fourth in the list of effects. Also in the Custom Animation task pane, select the 13th animation effect (motion path for the second picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the green arrow for the first picture motion path. Drag the 13th animation effect until it is sixth in the list of effects. Under Modify: Right, in the Start list, select With Previous. Drag the 14th animation effect (motion path for the second large rectangle) until it is eighth in the list of effects. Select the 15th animation effect (motion path for the third picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Drag the 15th animation effect until it is 10th in the list of effects. Under Modify: Right, in the Start list, select With Previous. Drag the 16th animation effect (motion path for the third large rectangle) until it is 12th in the list of effects. Select the 17th animation effect (motion path for the fourth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Drag the 17th animation effect until it is 14th in the list of effects. Under Modify: Right, in the Start list, select With Previous. Drag the 18th animation effect (motion path for the fourth large rectangle) until it is 16th in the list of effects. Select the 19th animation effect (motion path for the fifth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Also in the Custom Animation task pane, drag the 19th animation effect until it is 18th in the list of effects. Under Modify: Right, in the Start list, select With Previous. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial. Click the button next to Direction, and then click From Corner (fifth option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 25% (fourth row, first option from the left).

3 PENDAHULUAN Zaman revolusi fisik ( ) merupakan suatu zaman yang paling cemerlang dalam sejarah Indonesia, hak-hak Indonesia akan kemerdekaan ditunjukkan oleh pengorbanan-pengorbanan yang luar biasa oleh bangsa Indonesia. Revolusi yang menjadi alat tercapainya kemerdekaan bukan hanya merupakan suatu kisah sentral dalam sejarah Indonesia melainkan merupakan suatu unsur yang kuat di dalam persepsi bangsa Indonesia itu sendiri Custom animation effects: fly in and box out (Intermediate) Tip: For best results when reproducing the picture effect on this slide, you may want to use the Snap objects to other objects feature. To do so, right-click the slide background and then click Grid and Guides. Under Snap to, select Snap objects to other objects. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 4” and the Width box is set to 5.33”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the in the Shape Height box, enter 0.05”. In the Shape Width box, enter 10.3”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, and then click Blue, Accent 1 (first row, fifth option from the left). Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Preset, and then under Presets, click Preset 8 (second row, fourth option from the left). Select the rectangle. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process two more times for a total of four rectangles. Drag one of the rectangles until the bottom edge of the rectangle meets the top edge of the picture. Drag another rectangle until the top edge of the rectangle meets the bottom edge of the picture. Press and hold CTRL, and then select the other two rectangles. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the in the Shape Height box, enter 7.8”. In the Shape Width box, enter 0.05”. Drag one of the vertical rectangles until the right edge of the rectangle meets the left edge of the picture. Drag the other vertical rectangle until the left edge of the rectangle meets the right edge of the picture. Press and hold CTRL, and then select both of the horizontal (top and bottom) rectangles. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Press and hold CTRL, and then select both of the vertical (left and right) rectangles. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. Press and hold CTRL, and then select the four rectangles on the slide. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In, and then click OK. Under Modify: Fly In, in the Start list, select With Previous. Under Modify: Fly In, in the Speed list, select Medium. On the slide, select the top horizontal rectangle. In the Custom Animation task pane, under Modify: Fly-In, in the Direction list, select From Bottom. On the slide, select the bottom horizontal rectangle. In the Custom Animation task pane, under Modify: Fly-In, in the Direction list, select From Top. On the slide, select the left vertical rectangle. In the Custom Animation task pane, under Modify: Fly-In, in the Direction list, select From Right. On the slide, select the right vertical rectangle. In the Custom Animation task pane, under Modify: Fly-In, in the Direction list, select From Left. On the slide, select the picture. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Box, and then click OK. Under Modify: Box, in the Start list, select With Previous. Under Modify: Box, in the Direction list, select Out. Also in the Custom Animation task pane, select the fifth animation effect (box effect for the picture). Click the arrow to the right of the selected effect, and then click Timing. In the Fade dialog box, on the Timing tab, do the following: In the Delay box, enter 1.3. In the Speed box, enter 0.7 seconds, and then click OK. Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Basic, click Fly Out, and then click OK. Under Modify: Fly Out, in the Start list, select With Previous. Under Modify: Fly Out, in the Speed box, select Medium. Also in the Custom Animation task pane, with all four fly-out effects still selected, click the arrow to the right of the last fly-out effect, and then click Timing. In the Fly Out dialog box, on the Timing tab, in the Delay box, enter 0, and then click OK. Also in the Custom Animation task pane, select the sixth animation effect (first fly-out effect). Under Modify: Fly Out, in the Start list, select On Click. On the slide, select the top horizontal rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out, in the Direction list, select To Bottom. On the slide, select the bottom horizontal rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out, in the Direction list, select To Top. On the slide, select the left vertical rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out, in the Direction list, select To Right. On the slide, select the right vertical rectangle. In the Custom Animation task pane, select the highlighted fly-out effect. Under Modify: Fly Out, in the Direction list, select To Left. Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Basic, click Box, and then click OK. Under Modify: Box, in the Direction list, select In. Click the arrow to the right of the ninth animation effect (box effect for the picture), and then click Timing. In the Box dialog box, on the Timing tab, do the following: In the Delay box, enter 0. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 46%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 60% (third row, fifth option from the left).

4 Kondisi masyarakat pada Awal Revolusi fisik
Kedatangan sekutu di indonesia untuk melindungi rakyat dan untuk memulihkan keamanan dan ketertiban hingga pemerintah Hindia Belanda yang berwenang berfungsi kembali. Komando sekutu memerintahkan para komandan jepang untuk menyerang dan merebut kembali kota-kota yang sudah dikuasai orang Indonesia. Dipakainya pasukan jepang oleh sekutu untuk melawan republic selanjutnya mendorong orang Indonesia untuk melawan Inggris sekaligus Belanda, dan memperkuat kecurigaan mereka bahwa Indonesia ingin dikembalikan kepada status penjajahan Custom animation effects: video wall reveal picture (Basic) Tip: For best results when reproducing the picture effects on this slide, you may want to use the Snap objects to grid feature. To do so, right-click the slide background and select Grid and Guides. Under Snap to, select Snap objects to grid. To reproduce the background on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. Right-click the slide background area, and then click Format Background. In the Format Background dialog box, in the left pane, select Fill, and then do the following in the Fill pane: Select Picture or texture fill. Under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert. To reproduce the first row of squares with animation effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option on the left). On the slide, drag to draw the rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following to change it into a square: In the Shape Height box, enter 2.5”. In the Shape Width box, enter 2.5”. Under Drawing Tools, on the Format tab, in the Shape Styles group, do the following: Click the arrow next to Shape Fill, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Click the arrow next to Shape Outline, and then click No Outline. Select the square. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process two more times for a total of four squares. Press and hold CTRL, and then select all four squares. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Top. Click Distribute Horizontally. Press and hold CTRL, and then select all four squares. On the Animations tab, in the Animations group, click Custom Animation, and then do the following in the Custom Animation task pane: Click Add Effect, point to Exit, and then click More Effects. In the Add Exit Effect dialog box, under Subtle, click Fade, and then click OK. Under Modify: Fade, in the Start list, select With Previous. Under Modify: Fade, in the Speed list, select Very Fast. Also in the Custom Animation task pane, do the following: Select the first animation effect. Click the arrow to the right of the first animation effect (fade effect for the first square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0, and then click OK. Select the second animation effect. Click the arrow to the right of the second animation effect (fade effect for the second square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.1, and then click OK. Select the third animation effect. Click the arrow to the right of the third animation effect (fade effect for the third square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.2, and then click OK. Select the fourth animation effect. Click the arrow to the right of the fourth animation effect (fade effect for the fourth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.3, and then click OK. To reproduce the second row of squares with animation effects on this slide, do the following: On the slide, select one of the squares in the first row. On the Home tab, in the Clipboard group, click the arrow under Paste, click Duplicate, and then drag the duplicate square away from the first row of squares. Repeat this process two more times for a total of four new squares (a total of eight squares on the slide). On the Home tab, in the Editing group, click Select, and then click Selection Pane. Press and hold CTRL, and then in the Selection and Visibility pane, select the fifth, sixth, seventh, and eighth objects (four new squares). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Middle. In the Custom Animation task pane, select the fifth, sixth, seventh, and eighth animation effects (fade effects for the second row of squares), and then do the following: Select the fifth animation effect. Click the arrow to the right of the fifth animation effect (fade effect for the fifth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.4, and then click OK. Select the sixth animation effect. Click the arrow to the right of the sixth animation effect (fade effect for the sixth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5, and then click OK. Select the seventh animation effect. Click the arrow to the right of the seventh animation effect (fade effect for the seventh square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.6, and then click OK. Select the eighth animation effect. Click the arrow to the right of the eighth animation effect (fade effect for the eighth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.7, and then click OK. To reproduce the third row of squares with animation effects on this slide, do the following: On the slide, select one of the squares in the second row. On the Home tab, in the Clipboard group, click the arrow under Paste, click Duplicate, and then drag the duplicate square away from the second row of squares. Repeat this process two more times for a total of four new squares (a total of 12 squares on the slide). Press and hold CTRL, and then in the Selection and Visibility pane, select the ninth, 10th, 11th, and 12th objects (four new squares). Click Align Bottom. In the Custom Animation task pane, select the ninth, 10th, 11th, and 12th animation effects (fade effects for the third row of squares), and then do the following: Select the ninth animation effect. Click the arrow to the right of the ninth animation effect (fade effect for the ninth square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.8, and then click OK. Select the 10th animation effect. Click the arrow to the right of the 10th animation effect (fade effect for the 10th square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.9, and then click OK. Select the 11th animation effect. Click the arrow to the right of the 11th animation effect (fade effect for the 11th square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 1, and then click OK. Select the 12th animation effect. Click the arrow to the right of the 12th animation effect (fade effect for the 12th square), and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 1.1, and then click OK. Kondisi masyarakat pada Awal Revolusi fisik

5 Kondisi Sosial Budaya pada Masa Revolusi Fisik
Surabaya menjadi ajang pertempuran yang paling hebat selama revolusi Keadaan di dalam republik di jawa pada tahun 1948 sangat gawat Pada tanggal 29 Agustus 1947 secara sepihak mereka memproklamirkan apa yang dinamakan “garis van mook”. Pola makan yang berubah, pola hidup yang berubah serta tekanan-tekanan sosial ekonomi yang menghimpit menyebabkan perubahan mendasar dalam aspek-aspek fisik maupun psikologi masyarakat Di sumatera, terjadi revolusi-revolusi sosial yang keras dan menentang elite-elite bangsawan perpecahan di kalangan elite revolusi di jawa menjadi semakin tegang Half-circle picture with accent arcs (Basic) To reproduce the shape effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 7.5”. In the Shape Width box, enter 7.5”. Drag the yellow diamond adjustment handle on the right side of the arc to the bottom of the slide to create a half-circle. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Picture or texture fill, and then do the following under Insert from: Click File. In the Insert Picture dialog box, select a picture, and then click Insert. Select Tile picture as texture. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select No line. Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Inner click Inside Diagonal Top Right (first row, third option from the left), and then do the following: In the Transparency box, enter 70%. In the Blur box, enter 20 pt. In the Distance box, enter 20 pt. Drag the half-circle to the left until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Middle. Select the arc. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the second arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 6.79”. In the Shape Width box, enter 10.03”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, click Fill in the left pane. In the Fill pane, select No fill. Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line and then do the following: Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 1.5 pt. Drag the second arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Select the second arc. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the third arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 6.86”. In the Shape Width box, enter 9.98”. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Lighter 40% (fourth row, fifth option from the left). In the Transparency box, enter 77%. Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 208, Green: 215, Blue: 222. In the Format Shape dialog box, in the Line Style pane, in the Transparency box, enter 90%. Also in the Format Shape dialog box, click Line Style in the left pane. In the Line Style pane, in the Width box, enter 4.25 pt. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Left. Drag the third arc left on the slide until the two middle yellow adjustment diamonds are lined up with the left edge of the slide. Drag the third arc vertically as needed to position it slightly above the second arc on the slide. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Direction, and then click Linear Up (second row, second option from the left). In the Angle box, enter 270⁰. Under Gradient stops, click Add or Remove until four stops appear in the drop-down list. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 167, Green: 185, Blue: 197. In the Stop position box, enter 30%. Select Stop 3 from the list, and then do the following: In the Stop position box, enter 70%. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select Stop 4 from the list, and then do the following:

6 Berakhirnya Revolusi Fisik
Dengan pengakuan kedaulatan tanggal 27 desember 1949, maka berakhirlah masa revolusi bersenjata di Indonesia dan secara de jure pihak Belanda telah mengakui kemerdekaan Indonesia dalam bentuk RIS. Namun atas kesepakatan rakyat Indonesia tanggal 17 agustus 1950, RIS dibubarkan dan dibentuk NKRI. Selanjutnya pada tanggal 28 september 1950, Indonesia di terima menjadi anggota PBB yang ke-60. Hal ini berarti bahwa kemerdekaan Indonesia secara resmi telah di akui oleh dunia internasional. Custom animation effects: picture changes during motion path (Advanced) To reproduce the first picture effect on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Insert tab, in the Illustrations group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 2” and the Width box is set to 2”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Under Picture Tools, on the Format tab, in the bottom right corner of the Picture Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line, click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Also in the Format Shape dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 1.5 pt. Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, and then under Outer click Offset Center (second row, second option from the left). On the Animations tab, in the Animations group, click Custom Animation. On the slide, select the picture. In the Custom Animation task pane, click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade, and then click OK. Also in the Custom Animation task pane, select the first animation effect (fade effect for the picture), and then under Modify: Fade do the following: In the Start list, select With Previous. In the Speed list, select Fast. Also in the Custom Animation task pane, click Add Effect, point to Motion Paths, and then click Right. Also in the Custom Animation task pane, select the second animation effect (motion path for the picture), and then under Modify: Right, in the Start list, select With Previous. Also in the Custom Animation task pane, click the arrow to the right of the second animation effect, and then click Timing. In the Right dialog box, on the Timing tab, in the Speed box, enter 10 seconds. On the slide, select the motion path. Press and hold SHIFT to constrain the path to a straight, horizontal line, and then drag the right adjustment handle to the right, stopping approximately 1.5” left of the right edge of the slide. (Note: On the View tab, in the Show/Hide group, select Ruler to measure approximately where the endpoint is on the slide.) To reproduce the other pictures on this slide, do the following: Select the picture. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process for a total of four duplicate pictures. Select a duplicate picture. Under Picture Tools, on the Format tab, in the Adjust group, click Change Picture. In the Insert Picture dialog box, select a new picture, and then click Insert. Repeat steps 2-4 for the other duplicate pictures. To reproduce the other animation effects on this slide, do the following: In the Custom Animation task pane, select the third animation effect (fade effect for the second picture). Click the arrow to the right of the selected effect, and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 2.5. Also in the Custom Animation task pane, select the fifth animation effect (fade effect for the third picture). Click the arrow to the right of the selected effect, and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 5. Also in the Custom Animation task pane, select the seventh animation effect (fade effect for the fourth picture). Click the arrow to the right of the selected effect, and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 7.5. On the slide, press and hold SHIFT and select all four pictures. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Selected Objects. Click Align Center. Click Align Middle. Drag the pictures into the top left corner of the slide. To reproduce the background effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 3.42”. In the Shape Width box, enter 10”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 1%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 94, Green: 156, Blue: 198. In the Transparency box, enter 60%. Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. In the Transparency box, enter 90%. On the slide, drag the rectangle vertically to position it just above the middle of the slide. On the Home tab, in the Drawing group, click Arrange, and then do the following: Point to Align, and then click Align to Slide. Point to Align, and then click Align Center. Click Send to Back. Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Direction, and then click Linear Down (first row, second option from the left) In the Angle box, enter 90⁰. In the Stop position box, enter 70%. Click the button next to Color, and then click White, Background 1, Darker 5% (second row, first option from the left). Click the button next to Color, and then click White, Background 1, Darker 25% (fourth row, first option from the left).

7 THANKS FOR YOUR ATTENTION
Custom animation effects: snow scene (Difficult) Tip: For the effects on this slide, it is best to use a large, high-resolution picture. The picture in the example above is 2000 pixels wide by 750 pixels high. You will want to use drawing guides to reproduce the animation effects. To display and set the drawing guides, do the following: Right-click the slide background and select Grid and Guides. In the Grid and Guides dialog box, under Guide settings, select Display drawing guides on screen, and then click OK. (Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. As you drag the guides, the cursor will display the new position.) Press and hold CTRL, select the vertical guide, and then drag it right to the 5.00 position. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustration group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 7.5” and the Width box is set to 20”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Left. Click Align Middle. To reproduce the first snowflake effect on this slide, do the following: On the Insert tab, in the Illustrations group, click Clip Art. In the Clip Art pane, in the Search for box, enter j wmf. In the Search in list, select Everywhere, and then click Go. Select the clip art file in the pane to insert it into the slide. (Note: If you choose another clip art file, the clip art must be in the Windows Metafile format [.wmf].) On the slide, select the clip art. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup. In the Microsoft Office PowerPoint dialog box, click Yes. On the slide, select the converted clip art. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the top-level group. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup. Also in the Selection and Visibility pane, do the following: Select the Autoshape object, and then press DELETE. Press and hold CTRL+SHIFT, select all of the rectangle shapes, and then press DELETE. Also in the Selection and Visibility pane, press and hold CTRL+SHIFT, and then select all the freeform shapes. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group. Also in the Selection and Visibility pane, select the group of objects (the snowflake). On the Home tab, in the Drawing group, click the arrow next to Shape Fill, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the slide, right-click the group of objects and then click Cut. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Paste Special. In the Paste Special dialog box, check Paste, and then under As, select Picture (PNG). On the slide, select the new snowflake. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotation, do the following: In the Height box, enter 1”. In the Width box, enter 0.87”. In the Rotation box, enter 20°. Drag the snowflake into the top left corner of the picture. To reproduce the second snowflake effect on this slide, do the following: On the slide, select the snowflake. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the second snowflake. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotation do the following: In the Height box, enter 0.42”. In the Width box, enter 0.36”. Drag the second snowflake off the left edge of the slide. To reproduce the third snowflake effect on this slide, do the following: Select the second snowflake picture on the slide. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the third snowflake. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotation do the following: In the Height box, enter 0.56”. In the Width box, enter 0.48”. Drag the third snowflake off the left edge of the slide, below and slightly left of the second snowflake. To reproduce the text box for the quotation on this slide, do the following: On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw a text box. Enter text for the quotation in the text box, and then select the text. On the Home tab, in the Font group, select Georgia from the Font list, select 18 from the Font Size list, click Italic, click the arrow next to Font Color, and then under Theme Colors click White, Background 1. Drag the text box to the right of the first snowflake, near the top left corner of the slide. To reproduce the text box for the quotation attribution on this slide, do the following: Enter text for the quotation attribution in the text box, and then select the text. On the Home tab, in the Font group, select Georgia from the Font list, select 14 from the Font Size list, click Italic, click the arrow next to Font Color, and then under Theme Colors click White, Background 1. Drag the text box below and to the right of the quotation text box. To reproduce the animation effects for the second snowflake from the top, do the following: It will be helpful to view the ruler and zoom out from the slide in order to reproduce the animation effects. On the View tab, in the Zoom group, click Zoom. In the Zoom dialog box, select 50%. Also in the View tab, in the Show/Hide group, select Ruler. On the Animations tab, in the Animations group, click Custom Animation. Select the top snowflake off of the left edge of the slide. In the Custom Animation task pane, click the arrow to the right of Add Effect, point to Motion Paths, point to Draw Custom Path, and then click Curve. To draw the curved motion path, do the following on the slide: Click the first point off the left edge of the slide, near the snowflake. Click the second point 3.5” to the left of the 0.00 vertical drawing guide and 0.5” above the horizontal drawing guide. Click the third point 0.5” to the left of the 0.00 vertical drawing guide and 0.5” below the horizontal drawing guide. Click the fourth point 2” to the right of the 0.00 vertical drawing guide and 0.4” below the horizontal drawing guide. Click the fifth point 4” to the right of the 0.00 vertical drawing guide and 0.8” below the horizontal drawing guide. Double-click the sixth and final point 0.5” to the right of the 5.00 vertical drawing guide and 0.75” below the horizontal drawing guide, off the right edge of the slide. In the Custom Animation task pane, select the first animation effect (curved motion path). Click the arrow to the right of the effect, and then click Effect Options. In the Curve dialog box, do the following: On the Effect tab, under Settings, in the Path list, select Locked. On the Effect tab, under Settings, clear Smooth Start. On the Effect tab, under Settings, clear Smooth End. On the Timing tab, in the Start list, select With Previous. On the Timing tab, in the Speed box, enter 12 seconds. Select the top snowflake off the left edge of the slide. In the Custom Animation task pane, click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Spin, and then click OK. Select the second animation effect (spin effect). Under Modify: Spin, in the Start list, select With Previous. Click the arrow to the right of the second animation effect, and then click Timing. In the Spin dialog box, on the Timing tab, do the following: In the Speed box, enter 6 seconds. In the Repeat list, select 2. Select the top snowflake off the left edge of the slide. In the Custom Animation task pane, click the arrow to the right of Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink, and then click OK. In the Custom Animation task pane, click the arrow to the right of the third animation effect (grow/shrink effect), and then click Effect Options. In the Grow/Shrink dialog box, do the following: On the Effect tab, in the Size list, in the Custom box, enter 60%, and then press ENTER. On the Effect tab, select Smooth Start. On the Effect tab, select Smooth End. On the Effect tab, select Auto-reverse. On the Timing tab, in the Speed box, enter 6 seconds. To reproduce the animation effects for the third snowflake from the top, do the following: Select the bottom snowflake off the left edge of the slide. In the Custom Animation task pane, click the arrow to the right of Add Effect, point to Motion Paths, point to Draw Custom Path, and then click Curve. Click the second point 3.5” to the left of the 0.00 vertical drawing guide and 1” below the horizontal drawing guide. Click the third point at the intersection of the 0.00 vertical and horizontal drawing guides. Click the fourth point 2” to the right of the 0.00 vertical drawing guide and 0.25” below the horizontal drawing guide. Click the fifth point 4” to the right of the vertical drawing guide and 0.5” above the horizontal drawing guide. Double-click the sixth and final point 0.25” to the right of the 5.00 vertical drawing guide and 0.5” above the horizontal drawing guide, off the right edge of the slide. In the Custom Animation task pane, click the arrow to the right of the fourth animation effect (second motion path), and then click Effect Options. In the Custom Path dialog box, do the following: On the Effect tab, clear Smooth Start. On the Timing tab, in the Delay box, enter 8. On the Timing tab, in the Speed box, enter 13 seconds, and then click OK. Select the bottom snowflake off the left edge of the slide. In the Custom Animation task pane, click the arrow to the right of Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Spin, and then click OK. In the Custom Animation task pane, select the fifth animation effect (spin effect), and under Modify: Spin do the following: In the Start list, select With Previous. In the Amount list, in the Custom box, enter 360°, and then press ENTER. Also in the Amount list, select Counterclockwise. In the Custom Animation task pane, click the arrow to the right of the fifth animation effect, and then click Timing. In the Spin dialog box, on the Timing tab, do the following: In the Delay box, enter 8. In the Speed box, enter 13 seconds. Select the bottom snowflake off the left edge of the slide. In the Custom Animation task pane, click the arrow to the right of Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Grow/Shrink. In the Custom Animation task pane, select the sixth animation effect (grow/shrink effect). Click the arrow to the right of the effect, and then click Effect Options. In the Grow/Shrink dialog box, do the following: On the Effect tab, under Settings, in the Size list, in the Custom box, enter 40%, and then press ENTER. On the Effect tab, under Settings, select Smooth Start. On the Effect tab, under Settings, select Smooth End. On the Effect tab, under Settings, select Auto-reverse. On the Timing tab, in the Speed box, enter 6.5 seconds. To reproduce the picture animation effects, do the following: On the slide, select the large picture. In the Custom Animation task pane, click Add Effect, point to Motion Paths, and then click Left. In the Custom Animation task pane, select the seventh animation effect (left motion path for the large picture). On the slide, point to the endpoint (red arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the endpoint all the way to the left edge of the slide. (Note: Be sure that you only extend the motion path by dragging the endpoint, and do not drag the entire motion path up, down, left, or right. You may need to zoom in on the slide in order to drag the path more accurately. On the View tab, in the Zoom group, click Zoom. In the Zoom dialog box, select 100% or larger.) In the Custom Animation task pane, click the arrow to the right of the seventh animation effect, and then click Timing. In the Left dialog box, on the Timing tab, do the following: In the Delay box, enter 17. In the Speed box, enter 3 seconds. To reproduce the animation effects for the first snowflake from the top, do the following: On the slide, select the snowflake immediately to the left of the text box. In the Custom Animation task pane, click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Faded Zoom. In the Custom Animation task pane, click the arrow to the right of the eighth animation effect (faded zoom effect), and then click Timing. In the Faded Zoom dialog box, on the Timing tab, do the following: In the Delay box, enter 16. In the Speed box, select 1 second (Fast). On the slide, select the snowflake immediately to the left of the text box. In the Custom Animation task pane, click Add Effect, point to Motion Paths, point to Draw Custom Path, and then click Curve. Click the first point off the left edge of the slide, 2” below the horizontal drawing guide. Click the second point 3” to the left of the 0.00 vertical drawing guide and 3” below the horizontal drawing guide. Click the third point 1” to the left of the 0.00 vertical drawing guide and 2.75” below the horizontal drawing guide. Click the fourth point 2.75” to the right of the 0.00 vertical drawing guide and 1” below the horizontal drawing guide. Click the fifth point 2.25” to the right of the 0.00 vertical drawing guide and 0.5” above the horizontal drawing guide. Click the sixth point on the 0.00 vertical drawing guide and 2” above the horizontal drawing guide. Double-click the seventh and final point on the snowflake. In the Custom Animation task pane, click the arrow to the right of the ninth animation effect (custom motion path), and then click Timing. In the Custom Path dialog box, on the Timing tab, do the following: In the Speed box, select 5 seconds (Very Slow). Right-click the slide background area, and then click Grid and Guides. In the Grid and Guides dialog box, under Guide settings, clear Display drawing guides on screen, and then click OK. To reproduce the animation effects for the quotation text box, do the following: On the slide, select the quotation text box. In the Custom Animation task pane, click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade. In the Custom Animation task pane, click the arrow to the right of the tenth animation effect (fade effect for the text box), and then click Effect Options. In the Fade dialog box, do the following: On the Effect tab, in the Animate text list, select By letter. On the Effect tab, in the % delay between letters box, enter 4. On the Timing tab, in the Delay box, enter 21. On the Timing tab, in the Speed box, enter 0.5 seconds. To reproduce the animation effects for the quotation attribution text box, do the following: Select the quotation attribution text box. In the Custom Animation task pane, click the arrow to the right of Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade. In the Custom Animation task pane, click the arrow to the right of the 11th animation effect (fade effect for the quotation attribution text box), and then click Effect Options. In the Fade dialog box, on the Timing tab, do the following: In the Delay box, enter 22.5. In the Speed list, select 0.5 seconds. THANKS FOR YOUR ATTENTION