PART 4 TRAINING DELAY Dosen : Dwisnanto Putro, ST, M.Eng

• Untuk LED ANODA : Logika 0 = led menyala Logika 1 = led mati • Untuk LED KATODA :Logika 0 = led mati Logika 1 = led menyala LED (LIGHT EMITING DIODE) Published By Stefanikha69

• Delay = tunda • Penundaan terhadap kinerja mikrokontroler • DELAY Published By Stefanikha69

• Menghasilkan delay dalam program-C berada pada header delay.h yang harus dimasukan (include) sebelum digunakan. • Sebelum memanggil fungsi, interupsi harus dimatikan terlebih dahulu, apabila tidak maka delay akan lebih lama dari yang diharapkan. Juga sangat penting untuk menyebutkan frekuensi clock chip IC AVR yang digunakan pada menu Project – configure - C compiler - Code Generation. • DELAY Published By Stefanikha69

• Header delay #include • Perintah delay delay_ms(------); Waktu tunda dalam milidetik: Misalkan: delay_ms(1000); berarti ditunda selama 1 detik • DELAY Published By Stefanikha69

• Dengan system delay, menciptakan system sinyal pulsa • DELAY Published By Stefanikha69

• New Project • Run CodeVision Published By Stefanikha69

• Chip select Published By Stefanikha69

configuration chip select • Chip ATMEGA 8535 • Clock Mhz Published By Stefanikha69

• Untuk port gunakan PORTC untuk LED PORTC.0 – PORTC.7 = output (0) Published By Stefanikha69

• Save and Generate Published By Stefanikha69

• Save File – make folder and files Published By Stefanikha69

• Display Published By Stefanikha69

• Configuration ready compile Published By Stefanikha69

• CODE PROGRAM • Untuk menyalakan led bergantian misalkan pada posisi PORTC.0, PORTC.1 dan PORTC.2 dengan masing-masing waktu tunda selama 1 detik. (jadi waktu keseluruhan yang dibutuhkan sistem yaitu 3 detik) while(1){ PORTC=0b ; Delay_ms(1000); PORTC=0b ; Delay_ms(1000); PORTC=0b ; Delay_ms(1000); } Published By Stefanikha69

SETTING USB – DOWNLOADER : • INSTALL DEVICE USB DOWNLOADER • CONNECT USB DOWNLOADER TO PC/LAPTOP SETTING COM PORT: • COMPUTER -> MANAGE -> DEVICE MANAGER • PORT (COM &LPT) -> PROLIFIC USB TO SERIAL COMM PORT (COM....) Published By Stefanikha69

• Configuration PORT Programmer Published By Stefanikha69

Choice : • AVR Chip programmer type • COM PORT • BAUD RATE Published By Stefanikha69

• COMPILER AND BUILD ALL PROGRAM Or Shift F9 Published By Stefanikha69

• Connecting USB Downloader - PC/Laptop - Microcontroller, And.... Published By Stefanikha69

• Process Downloading Published By Stefanikha69

FINISH Published By Stefanikha69

• Error DOWNLOADING Solution : • Check COM PORT • Check Baud Rate • Check Connection Downloader • Check Prog/Serial TTL select Published By Stefanikha69

• CV AVR WITH PROTEUS OPEN PROGRAM ISIS PROTEUS PROFESSIONAL Published By Stefanikha69

• synchronization cv avr with proteus • Creat Project and Design • Double click pict microcntroller Published By Stefanikha69

• synchronization cv avr with proteus • Select clock frequency • Select program file, (HEX file type) Published By Stefanikha69

• synchronization cv avr with proteus • Running ISIS Proteus • FINISH... Created by. Dwisnanto Putro, Manado, September 2012 Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.7, PORTC.6 dan PORTC.5 dengan masing-masing delay 250 ms Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.0, PORTC.2, PORTC.4 dan PORTC.6 dengan sistem led menyala secara berurutan bergantian. masing- masing delay 100 ms. Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.3. masing-masing delay 150 ms. Misalkan: • Step 1: hanya PORTC.0 menyala • Step 2: hanya PORTC.1 menyala • Step 3: hanya PORTC.2 menyala • Step 4: hanya PORTC.3 menyala Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.1 s/d PORTC.6. masing-masing delay 100 ms. Misalkan: • Step 1: hanya PORTC.1 mati • Step 2: hanya PORTC.2 mati • Step 3: hanya PORTC.3 mati • Step 4: hanya PORTC.4 mati • Step 5: hanya PORTC.5 mati • Step 6: hanya PORTC.6 mati (PORTC Yang lain menyala) Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. (Secara berurutan menyala dari PORTC.0 s/d PORTC.7) Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. (Secara berurutan menyala dari PORTC.7 s/d PORTC.0) Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. Misalkan: • Step 1: PORTC.0 dan PORTC.7 ON • Step 2: PORTC.1 dan PORTC.6 ON • Step 3: PORTC.2 dan PORTC.5 ON • Step 4: PORTC.3 dan PORTC.4 ON Published By Stefanikha69

TASK • BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. Misalkan: • Step 1: PORTC.0 dan PORTC.7 ON • Step 2: PORTC.1 dan PORTC.6 ON • Step 3: PORTC.2 dan PORTC.5 ON • Step 4: PORTC.3 dan PORTC.4 ON • Step 5: PORTC.2 dan PORTC.5 ON • Step 6: PORTC.1 dan PORTC.6 ON • Step 7: PORTC.0 dan PORTC.7 ON Published By Stefanikha69