Sakramen Tobat Sakramen penyembuhan

Slides:

Advertisements

Presentasi serupa

Session 3 : Hidup dalam Roh Kudus.

Advertisements

Lesson 11 for June 14, 2014 PARA RASUL DAN HUKUM.

Petrus (Studious Man) Kisah 2 : 14,

KRISTUS, KEGENAPAN HUKUM TAURAT

KEMATIAN KRISTUS DAN HUKUM

BAGAIMANA SUPAYA DISELAMATKAN

Tommy's Window Slideshow

KOMISI KATEKETIK KEUSKUPAN BOGOR

SAKRAMEN-SAKRAMEN Kata “sakramen” berasal dari bahasa Latin “sacramentum” yang berarti : hal-hal yang berkaitan dengan yang kudus atau yang ilahi. Dalam.

BERDOA DEFINISI: Kepercayaan manusia terhadap Allah.

Baptisan Roh Kudus Bacaan: Kis 2:1-13.

PELAJARAN SEKOLAH SABAT DEWASA DALAM BENTUK POWERPOINT

Pendamaian: Korban Penghapus Dosa

AGAMA KRISTEN dan Katolik

S.A.K.R.A.M.E.N.T.A.L.I Sakramentali: tanda2 suci yg ditetapkan o/ Gereja u/ mengudusan macam2 situasi kehidupan. Doa yg diiringi dg tanda salib dan tanda2.

Teladan Paus Fransiskus: Cinta Gereja

Sakramen Untuk Pelayanan Persekutuan & Perutusan

Oleh: Pdt. Yohanes Bambang Mulyono

JUMAT AGUNG Makna Hari Jumat Agung: Hari ini ditetapkan sebgai hari laku tanpa dosa dengan kewajiban berpantang dan berpuasa bagi seluruh anggota Gereja.

TUJUH SAKRAMEN DALAM GEREJA KATOLIK

GEREJA &SAKRAMEN Pertemuan ke 9.

SAKRAMEN-SAKRAMEN PENYEMBUHAN

API PENYUCIAN Dasar dan maknanya.

Dipersiapkan oleh: Vonny

PELAYANAN SETIAP ANGGOTA

DIDALAM YESUS TIDAK ADA PENGHUKUMAN

MEMPERTANGGUNGJAWABKAN IMAN KATOLIK

PERSEKUTUAN DOA KARISMATIK KATOLIK

HARI RAYA PEMBAPTISAN TUHAN YESUS

PENEUMATOLOGI Pertemuan ke 6.

SIAPAKAH YESUS KRISTUS?

Apa itu Institusi sosial?

“Karya Pengampunan Allah Dalam Yesus Kristus”

Lesson 7 for May 16, Allah sebagai pribadi, nyata, penuh kasih dan peduli seperti seorang ayah (yang sempurna). Bapa kita Allah itu kudus dan.

BAB IV TUGAS GEREJA GEREJA YANG MENGUDUSKAN (LITURGIA)

Keluarga Mahasiswa Katolik (KMK) Santo Thomas Aquinas

Doa Bapa Kami Diskusi tentang Doa

Pendidikan agama kristen

PEMBEKALAN PRODIAKON PITC RUMPUT, 15 MARET 2015

Sunday Sermon, 10 September 2017 “Menasehati Sesama Saudara.”

SAKRAMEN-SAKRAMEN Kata “sakramen” berasal dari bahasa Latin “sacramentum” yang berarti : hal-hal yang berkaitan dengan yang kudus atau yang ilahi. Dalam.

Ekaristi Sumber Berkat Dalam Keluarga

CHRISTIAN FAITH CREDO RUMUSAN-RUMUSAN PENGAKUAN IMAN GEREJA UNIVERSAL : ANATASIUS NICEA KONSTANTINOPEL PENGAKUAN IMAN RASULI.

ROSARIO MERAH PUTIH AULA SD ST. MARIA, 9 APRIL 2016.

GEREJA: BERBAGAI UPACARA DAN RITUAL

Oleh: Khoerul Anwar TH a.

LITURGI IBADAH GKI.

SAKRAMEN (Pertemuan keempat)

INJIL DATANG KE TESALONIKA

KEMENANGAN ATAS KUASA-KUASA JAHAT

Tugas Tulislah doa Aku percaya / Syahadat Para rasul ! Apa Paroki anda.

MEMELIHARA JEMAAT AGAR SETIA

SIAPAKAH MANUSIA DALAM ROMA 7?

HAK & KEWAJIBAN ORANG BERIMAN

HIDUP BARU DALAM KRISTUS

BAPTISAN DAN KEPENUHAN ROH KUDUS Lesson 5 for February 4, 2017.

1. MENELUSURI HAKIKAT GEREJA a. Gereja : umat allah Dalam perjanjian baru gambaran gereja sebagai umat allah dapat ditemukan dalam 1ptr. 2:10; rm. 9:25.

KAMU AKAN MENJADI SAKSIKU

Roh Kudus dan Tritunggal Maha Kudus

BAB VII YESUS SEBAGAI SAHABAT, TOKOH IDOLA, DAN JURUSELAMAT

PARA PEMIMPIN GEREJA MULA-MULA

PENTAKOSTA Lesson 2 for July 14, 2018.

KEHIDUPAN DALAM GEREJA MULA-MULA

Roh Kudus dan Tritunggal Maha Kudus

DIPERSATUKAN DENGAN YESUS

PENGALAMAN PERSATUAN DI GEREJA MULA-MULA Lesson 5 for November 3, 2018.

PENATALAYANAN. PENATALAYANAN APAKAH PENATALAYANAN ITU? Kepada orang Kristen, penatalayanan berarti “tanggung jawab manusia kepada, dan penggunaan daripadanya,

“.... Sebab sebentar lagi akan datang keselamatan yang dari Pada-Ku” (Yes 56:1-8) “....sesungguhnya, seorang raja akan memerintah menurut kebenaran...”

JERITAN PARA NABI Lesson 5 for August 3, 2019.

Transcript presentasi:

Sakramen Tobat Sakramen penyembuhan Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.

Syarat Menerima Sakramen Tobat: Dibaptis secara katolik Baptis menjadi pintu gerbang untuk menerima sakramen-sakramen lain Mempunyai kesadaran akan DOSA Dosa menjauhkan hubungan harmonis antara manusia dengan Tuhan, manusia dengan Sesama dan manusia dengan Ciptaan Tuhan lainnya Orang perlu menyadari dosanya agar bisa menerima rahmat pengampunan dari Tuhan Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.

c. Datang untuk menerima Sakramen Tobat Peniten (orang yang mengaku dosa) datang kepada Imam/Uskup sebagai pelayan biasa sakramen ini Imam/Uskup hanyalah pengantara rahmat pengampunan, bukan yang mengampuni dosa si peniten d. Bertobat Tobat berarti punya niat untuk mengubah cara hidup lama yang berdosa dan menjadi pribadi baru yang lebih baik Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.

Tata cara pengakuan dosa Masuk kamar pengakuan dan membuat tanda salib b. Mengakukan dosa secara lisan kepada imam Dosa harus disebutkan secara lisan, bukan dalam hati, sebagai ungkapan kesungguhan. Dosa yang diungkapkan biasanya dosa berat (melanggar 10 perintah Allah) dan dosa-dosa yang sering dilakukan Setelah mengaku dosa, imam akan memberikan Absolusi (kata-kata pengampunan “atas nama Gereja dan kuasa yang diberikan Tuhan kepada saya, maka saya mengampuni dosamu. Dalam nama Bapa, Putera dan Roh Kudus”. Absolusi ini juga merupakan forma sakramen tobat. Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.

d. Keluar dari kamar pengakuan dan melaksanakan penitensi c. Menerima penitensi Penitensi adalah denda dosa. Penitensi bisa berupa berdoa atau perbuatan (mis: meminta maaf pada orang yang kita sakiti/musuhi) d. Keluar dari kamar pengakuan dan melaksanakan penitensi Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.

Siapa saja yang terkena ekskomunikasi? Eks (keluar) + Communio (=kumpulan/jemaat) = dikeluarkan dari kumpulan jemaat/pengucilan. Merupakan hukuman yang dijatuhkan oleh Gereja kepada umatnya yang dianggap melakukan pelanggaran berat. Anggota yang dikenai ekskomunikasi dilarang mengikuti komuni sampai ia bersedia menunjukkan penyesalan dengan cara bertobat. Siapa saja yang terkena ekskomunikasi? Menyebarkan ajaran sesat Melakukan dosa berat seperti pembunuhan, aborsi, dll Imam yang membocorkan rahasia pengakuan dosa Tidak mematuhi ajaran resmi Gereja katolik (magisterium) Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.

Orang yang terkena sangsi Ex-komunikasi ini bukan berarti sudah tidak Kristen lagi, sebab rahmat Pembaptisan tidak dapat dihapus. jika ia pastor/ kaum klerik, maka tidak dapat lagi menjalankan tugas-tugasnya sebagai pastor/ klerik. Namun mereka masih tetap boleh (bahkan dianjurkan) datang ke Misa Kudus seperti biasa. Maksudnya dari pemberian sangsi ex-komunikasi ini adalah supaya mereka yang melanggar peraturan dapat memeriksa dan memperbaiki diri dan bertobatmelalui Sakramen Pengakuan Dosa. Animated transparent shapes over picture background (Intermediate) Tip: You will need to use drawing guides to reproduce the effects on this slide. To display and set the drawing guides, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the View tab, in the Show group, select Ruler, and then click the Grid and Guides dialog box launcher. In the Grid and Guides dialog box, do the following: Under Grid settings, in the Spacing box, enter 0.25. Select Display grid on screen. Under Guide settings, select Display drawing guides on screen. On the slide, press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the vertical guide, and then drag it left to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it up to the 2.00 position. Press and hold CTRL, select the horizontal guide, and then drag it down to the 1.25 position. To reproduce the animated shape effects on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Diagonal Corner Rectangle (ninth option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 8.1”. In the Shape Width box, enter 10.5”. Under the Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Center. Click Align Middle. On the slide, drag the yellow slider in the upper left corner of the rectangle to the left so that all of the slide surface is covered by the rectangle. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink. On the Animations tab, in the Timing group, in the Start list, select With Previous. On the Animations tab, in the Timing group, in the Duration box, enter 0.5. On the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, on the Effect tab, in the Size box, next to Custom, enter 37%. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths, click Lines. On the Animations tab, in the Timing group, in the Duration box, enter 0.8. On the Animations tab, in the Timing group, in the Delay box, enter 0.7. On the Animations tab, in the Animation group, click Effect Options, and then click Left. On the slide, select the motion path. Point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Select the duplicate rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, point to the endpoint (red arrow) until the cursor becomes a two-headed arrow, and then drag the endpoint to the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. To reproduce the animated text effects on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size box, enter 26. Click the arrow next to Font Color and then click White, Background 1 (first row) On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the slide, drag the text box until it is centered at the intersection of the 2.00 top horizontal and the 2.00 left vertical drawing guides. With the text box still selected, on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance, click Fade. On the Animations tab, in the Timing group, in the Start list, select After Previous. On the Animations tab, in the Timing group, in the Duration box, enter 2. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow next to Copy, and then click Duplicate. Click in the second, duplicate text box, and then edit the text. Select the text in the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then click Black, Text 1 (first row). On the slide, drag the second text box until it is centered at the intersection of the 1.25 bottom horizontal and the 2.00 left vertical drawing guides. With the second text box still selected, on the Animations tab, in the Timing group, in the Delay box, enter 1. On the View tab, in the Show group, clear the Guides check box. To modify the color of the objects on the slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, select the first round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Transparency box, enter 50%. Also in the Selection and Visibility pane, select the Second round diagonal corner rectangle. Under the Drawing Tools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Solid fill in the Fill pane, and then do the following: Click the button next to Colors, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Also in the Selection and Visibility pane, select the first text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click Black, Text 1, Lighter 15% (fifth row, second option from the left). Also in the Selection and Visibility pane, select the second text box. On the Home tab, in the Font group, click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). To reproduce the background effects on this slide, do the following: On the Design tab, in the bottom right corner of the Background group, click the Format Background dialog box launcher. In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert.