Presentasi sedang didownload. Silahkan tunggu

Presentasi sedang didownload. Silahkan tunggu

BILLETS 10/31/ precaution POINTS Sharp edges are not acceptable. The corner radius should be at least 5.0mm. Sufficient front.

Presentasi serupa


Presentasi berjudul: "BILLETS 10/31/ precaution POINTS Sharp edges are not acceptable. The corner radius should be at least 5.0mm. Sufficient front."— Transcript presentasi:

1 BILLETS 10/31/20191 www.ambicasteels.com

2 precaution POINTS Sharp edges are not acceptable. The corner radius should be at least 5.0mm. Sufficient front and back end discard is to be given, so that no piping and powder or slag entrapment is there in the billets. Billet length should be as per P.O. Both end of the billets, should be cut through gas cutting or band saw cutting with proper finish. Straightness should be 4mm/meter maximum. It should be measured at one single curve only. Buckles in the middle and end of the billets are not allowed 10/31/20192 www.ambicasteels.com

3 South and Latin America Customers Served 137137 Countries Served 7 North America Customers Served 43 Countries Served 2 Ambica’s presence around the world OUR PRESENCE Ambica Steels is one of the most updated stainless steel companies in the world, employing a range of modern steel making technologies. PeruPeru LimaLima Colombia CaliCali USAUSA Houston Our Prominent Customers www.ambicasteels.com

4 TQM-Packaging www.ambicasteels.com

5 Thank you Ambica Steels Ltd. Email id – info@ambicasteels.com Add. - C-54/1, Wazirpur Industrial Area, New Delhi 110052, INDIA Tel: +91 (11) 47034400 www.ambicasteels.com


Download ppt "BILLETS 10/31/ precaution POINTS Sharp edges are not acceptable. The corner radius should be at least 5.0mm. Sufficient front."

Presentasi serupa


Iklan oleh Google