E-KATALOG E-PURCHASING.

Presentasi berjudul: "E-KATALOG E-PURCHASING."— Transcript presentasi:

1 E-KATALOG E-PURCHASING

2 Pengadaan secara elektronik
LKPP Mengembangkan Sistem Pengadaan Barang/Jasa secara elektronik Menetapkan arsitektur sistem informasi : Arah Bentuk Pengembangan Tatanan pelaksanaan

3 Pengadaan secara elektronik
E-tendering E-purchasing E-katalog

4 Pengadaan secara elektronik
1 Transparansi dan akuntabilitas 2 Akses pasar dan persaingan usaha sehat 3 Efisiensi Proses 4 monev dan audit, informasi real time SmartArt custom animation effects: vertical block list In the Direction list, select From Center (third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. (Intermediate) Also under Gradient stops, customize the gradient stops that you added as follows: To reproduce the SmartArt effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Block List (fourth row, third option from the left), and then click OK to insert the graphic into the slide. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). To create a fourth row, do the following: Select Stop 2 from the list, and then do the following: Select the third block shape (the shape on the left side) at the bottom of the graphic, under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and select Add Shape After. In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colors select White, Background 2, Darker 25% (fourth row, first option from the left). To add a bulleted rectangle next to the fourth block shape, select the fourth block shape, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click Add Bullet. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. To enter numbers and text in the blocks and rectangles, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each shape. (Note: In the example slide, the first-level text boxes contain “1,” “2,” “3,” and “4.” There should be only one second-level text box for each first-level box (delete the second bullet), and they contain “First statement,” “Second statement,” and so on.) On the slide, select the SmartArt graphic, and then in the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and select More Effects. In the Add Entrance Effect dialog box, under Subtle select Fade. With the SmartArt graphic still selected, click Add Effect, point to Motion Paths, and select Right. On the slide, right-click the motion path and select Reverse Path Direction. To reproduce the rectangle effects on this slide, do the following: Press and hold CTRL, and then select each of the rectangles (on the right side of the graphic). In the Custom Animation task pane, do the following: Press and hold CTRL, and select the two effects in the task pane. Click the arrow to the right of the selected effects and select Effect Options. In the Effects Options dialog box, do the following: Under SmartArt Tools, on the Format tab, in the Shapes group, click the arrow to the right of Change Shape, and under Rectangles select Snip Diagonal Corner Rectangle (fifth option from the left). With the rectangles still selected, drag one of the left center adjustment handles 1” to the left to lengthen all four rectangles. On the Timing tab, in the Speed list, select Fast. With the rectangles still selected, on the Home tab, in the Font group, in the Font Size box, select 36, and in the Font Color list, under Theme Colors select White, Background 1 (first row, first option from the left). On the SmartArt Animation tab, in the Group graphic list, select One by one. Click the double arrows under the two effects to show all the effects for all the shapes (16 effects). With the rectangles still selected, on the Home tab, in the bottom right corner of the Paragraph group, click the Paragraph dialog box launcher. In the Paragraph dialog box, under Indentation, do the following: Press and hold CTRL, select all of the effects, and then under Modify selected effects, in the Start list, select With Previous. In the Before Text box, enter 1”. Press and hold CTRL, select the first, third, fifth, and seventh effects (fade entrance effects), and then do the following: In the Special list, select Hanging. Next to the Special list, in the By box, enter 1”. Select the SmartArt graphic, and then under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click More Styles, and under 3-D select Polished Effect (first option from the left). Click Change, point to Entrance, and select More Effects. In the Change Entrance Effect dialog box, under Moderate, select Grow & Turn. Select the first rectangle from the top (“First statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Red, Accent 2 (first row, sixth option from the left). Under Modify: Grow & Turn, in the Start list, select After Previous. Press and hold CTRL, and select the ninth, 11th, 13th, and 15th effects (right motion paths). Click the arrow next to one of the selected effects, and then click Remove. Select the second rectangle from the top (“Second statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Olive Green, Accent 3 (first row, seventh option from the right). Drag the ninth effect (right motion path) until it is third in the list of effects. Drag the 10th effect (right motion path), until it is sixth in the list of effects. Select the third rectangle from the top (“Third statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Purple, Accent 4 (first row, eighth option from the left). Drag the 11th effect (right motion path), until it is ninth in the list of effects. To reproduce the background effects on this slide, do the following: Select the fourth rectangle from the top (“Fourth statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Orange, Accent 6 (first row, tenth option from the left). Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Direction, and then click From Center (third option from the left). To reproduce the circles on this slide, do the following: Press and hold CTRL, and then select the four block shapes (the shapes on the left side) in the SmartArt graphic, and then under SmartArt Tools, on the Format tab, in the Shapes group, click the arrow to the right of Change Shape, and under Basic Shapes select Oval (first row, first option from the left). On the slide, drag one of the top right adjustment handles to the left to change the ovals into circles and to decrease their size. In the Stop position box, enter 33%. Also with the four circles selected, drag the circles until they cover the bullet on the rectangles, and then on the Home tab, in the Font group, in the Font Color list, under Theme Colors select White, Background 1, Darker 50% (sixth row, first option from the left). Also on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left). In the Type list, select Radial.

5 Katalog Elektronik informasi teknis dan harga
Diselenggarakan dan ditetapkan oleh LKPP LKPP lakukan kontrak payung e-purchasing katalog elektronik

6 B E D A

7 TRANSAKSI KONTRAK PAYUNG
Pasal 53 ayat (3) kontrak harga satuan antara Pejabat K/L/D/I dengan penyedia barang/jasa yang dapat dimanfaatkan K/L/D/I TRANSAKSI

8 KRITERIA Dibutuhkan beberapa K/L/D/I Kebutuhan berulang
Pabrikan/Keagenan Custom animation effects: object spins on end (Advanced) To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, and then select Solid fill in the Fill pane. Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Slides group, click Layout, and then click Blank. To reproduce the rectangle on this slide, do the following: With the rounded rectangle still selected, under Drawing Tools, on the Format tab, in the Size group, do the following: Select the rectangle. Drag the yellow diamond adjustment handle to the left to decrease the amount of rounding on the corners. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rounded Rectangle (second option from the left). On the slide, drag to draw a rounded rectangle. In the Shape Height box, enter 3.5”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Solid fill, click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left). In the Shape Width box, enter 0.25”. Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer select Offset Bottom (first row, second option from the left), and then do the following: Also in the Format Shape dialog box, click Line Color in the left pane. In the Line Color pane, select No line. In the Blur box, enter 8.5 pt. In the Size box, enter 100%. In the Transparency box, enter 0%. Also in the Format Shape dialog box, click 3-D Format in the left pane. In the 3-D Format pane, do the following: In the Distance box, enter 1 pt. In the Angle box, enter 90°. Under Surface, click the button next to Material, and then under Standard click Matte (first row, first option from the left). Click the button next to Lighting, and then under Neutral click Soft (first row, third option from the left). Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Next to Top, in the Width box, enter 5 pt, and in the Height box, enter 5 pt. Select the duplicate rectangle. On the Home tab, in the Drawing group, do the following: On the slide, select the rounded rectangle. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Click the arrow next to Shape Fill, and then click No Fill. Press and hold CTRL, and then select both rectangles. On the Home tab, in the Drawing group, click Arrange, and do the following: Drag the second rectangle above the first rectangle until the lower edge overlays the top edge of the first rectangle. (Note: When the spinning animation effect is created later for these rectangles, the spin will center where the edges of the rectangles meet.) Click the arrow next to Shape Outline, and then click No Outline. Point to Align, and then click Align Center. Point to Align, and then click Align Selected Objects. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: On the slide, drag the group until it is centered horizontally on the left edge of the slide (straddling the edge). Click Group. Click Align Middle. Click Align to Slide. To reproduce the dashed arc on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Arc (third row, 12th option from the left). On the slide, drag to draw an arc. Select the arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: With the arc still selected, on the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then do the following: In the Shape Width box, enter 7.5”. In the Shape Height box, enter 7.5”. Under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left). Drag the arc until the yellow diamond adjustment handles are on the left edge of the slide. On the slide, drag the yellow diamond adjustment handle on the right side of the arc to the bottom of the arc to create a half circle. Point to Dashes, and then click Dash (fourth option from the top). With the arc still selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: To reproduce the half circle on this slide, do the following: Select the duplicate arc. Under Drawing Tools, on the Format tab, in the Size group, do the following: On the slide, select the arc. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. In the Shape Height box, enter 3.33”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Outline, and then click No Outline. With the second arc still selected, under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, and then under Theme Colors click White, Background 1, Darker 5% (second row, first option from the left). In the Shape Width box, enter 3.33”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Shadow, and then click Shadow Options. In the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Inner click Inside Right (second row, third option from the left), and then do the following: In the Angle box, enter 315°. In the Blur box, enter 24 pt. In the Transparency box, enter 86%. On the slide, drag the second arc until the yellow diamond adjustment handles are on the left edge of the slide. On the Home tab, in the Drawing group, click Arrange, and then do the following: In the Distance box, enter 4 pt. Point to Align, and then click Align Middle. Point to Align, and then click Align to Slide. Click Send to Back. To reproduce the button shapes on this slide, do the following: Select the oval. Under Drawing Tools, on the Format tab, in the Size group, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). On the slide, drag to draw an oval. In the Shape Height box, enter 0.34”. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. In the Fill pane, select Solid Fill. Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Lighter 80° (second row, seventh option from the left). Under Drawing Tools, on the Format tab, in the Shape Styles group, click More, and then click Light 1 Outline, Colored Fill – Dark 1 (third row, first option from the left). In the Shape Width box, enter 0.34”. Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer click Offset Bottom (first row, second option from the left), and then do the following: Also in the Format Shape dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format pane: Under Contour, click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). In the Size box, enter 3.5 pt. Under Bevel, click the button next to Top, and then under Bevel click Art Deco (third row, fourth option from the left). Next to Top, in the Width box, enter 5 pt, and in the Height box, enter 5 pt. On the slide, select the oval. Under Drawing Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Position tab, do the following: Select the oval. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. In the Vertical box, enter 1.5”. In the Horizontal box, enter 2.98”. Select the duplicate oval. Under Drawing Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Position tab, do the following: In the Horizontal box, enter 3.52”. Repeat step 9 two more times, for a total of four ovals. Under Drawing Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Position tab, do the following to position the third and fourth ovals: In the Vertical box, enter 2.98”. Select the fourth oval on the slide, and then enter 2.99” in the Horizontal box and 5.66” in the Vertical box. Select the third oval on the slide, and then enter 3.52” in the Horizontal box and 4.27” in the Vertical box. To reproduce the text on this slide, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box and select the text. On the Home tab, in the Font group, do the following: In the Font list, select Corbel. On the Home tab, in the Paragraph group, click Align Text Left to align the text left in the text box. Click the arrow next to Font Color, and then under Theme Colors click White, Background 1, Darker 50% (sixth row, first option from the left). In the Font Size list, select 22. On the slide, drag the text box to the right of the first oval. Drag the second text box to the right of the second oval. Click in the text box and edit the text. Select the text box. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat steps 5-7 to create the third and fourth text boxes, dragging them to the right of the third and fourth ovals. To reproduce the animation effects on this slide, do the following: On the Home tab, in the Editing group, click Select, and then click Selection Pane. On the Animations tab, in the Animations group, click Custom Animation. In the Selection and Visibility pane, select the rectangle group. In the Custom Animation task pane, do the following: Select the animation effect (spin effect for the rectangle group). Under Modify: Spin, do the following: Click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Spin. In the Amount list, in the Custom box, enter 123°, and then press ENTER. Also in the Amount list, click Counterclockwise. In the Start list, select With Previous. On the slide, select the first oval. In the Custom Animation task pane, do the following: In the Speed list, select Fast. Select the second animation effect (change fill color effect for the first oval). Under Modify: Change Fill Color, do the following: Click Add Effect, point to Emphasis, and then click More Effects. In the Add Emphasis Effect dialog box, under Basic, click Change Fill Color. In the Start list, select After Previous. On the slide, select the first text box. In the Custom Animation task pane, do the following: In the Speed list, select Very Fast. In the Fill Color list, click More Colors. In the Colors dialog box, on the Custom tab, enter values for Red: 130, Green: 153, Blue: 117. Select the third animation effect (fade effect for the first text box). Under Modify: Fade, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade. Select the fourth animation effect (spin effect for the rectangle group). Under Modify: Spin, do the following: In the Start list, select On Click. In the Amount list, in the Custom box, enter 22°, and then press ENTER. Also in the Amount list, click Clockwise. On the slide, select the second oval. In the Custom Animation task pane, do the following: Select the fifth animation effect (change fill color effect for the second oval). Under Modify: Change Fill Color, do the following: On the slide, select the second text box. In the Custom Animation task pane, do the following: Select the sixth animation effect (fade effect for the second text box). Under Modify: Fade, do the following: Click Add Effect, point to Entrance and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade. On the slide, select the third oval. In the Custom Animation task pane, do the following: Select the seventh animation effect (change fill color effect for the third oval). Under Modify: Change Fill Color, do the following: On the slide, select the third text box. In the Custom Animation task pane, do the following: Select the eighth animation effect (fade effect for the third text box). Under Modify: Fade, do the following: On the slide, select the fourth oval. In the Custom Animation task pane, do the following: Select the ninth animation effect (change fill color effect for the fourth oval). Under Modify: Change Fill Color, do the following: On the slide, select the fourth text box. In the Custom Animation task pane, do the following: Select the 10th animation effect (fade effect for the fourth text box). Under Modify: Fade, do the following: Harga pasar

9 E-katalog Barang/ jasa Kompetisi Klarifikasi Kontrak Payung Katalog
E-purchasing SmartArt custom animation effects: bending process (Intermediate) To reproduce the SmartArt effects on this slide, do the following: On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click Vertical Bending Process (fifth row, third option from the left), and then click OK to insert the graphic into the slide. On the Home tab, in the Slides group, click Layout, and then click Blank. On the slide, select the graphic. Under SmartArt Tools, on the Design tab, in the SmartArt Styles group, do the following: Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. Click More, and then under 3-D click Polished (first option from the left). Click Change Colors, and then under Accent 1 click Colored Fill – Accent 1 (second option from the left). Select the top left shape (starting point) in the graphic, and then do the following: On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 24 from the Font Size list. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Flowchart click Off-page Connector (second row, second option from the left). Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, and then under Theme Colors click Olive Green, Accent 3, Darker 25% (fifth row, seventh option from the left). Select the bottom right shape (ending point) in the graphic, and then do the following: Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Basic Shapes click Hexagon (first row, eighth option from the left). Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left). To reproduce the animation effects on this slide, do the following: On the slide, select the graphic. In the Custom Animation task pane, do the following: On the Animations tab, in the Animations group, click Custom Animation. Under Modify: Fade, in the Speed list, select Fast. Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Subtle, click Fade. Also in the Custom Animation task pane, select the fade effect. Click the arrow to the right of the fade effect, and then click Effect Options. In the Fade dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one, and then click OK. Also in the Custom Animation task pane, click the double arrow under the fade effect to expand the contents of the list of effects, and then do the following: Press and hold CTRL, select the first, third, fifth, seventh, ninth, 11th, 13th, 15th, and 17th animation effects (fade effects for the rectangles), and then do the following: Click Change, point to Entrance, and then click More Effects. In the Change Entrance Effect dialog box, under Moderate, click Stretch. Under Modify: Stretch, in the Start list, select With Previous. Under Modify: Stretch, in the Speed list, select Fast. Press and hold CTRL, and then select the first, third, fifth, 15th, and 17th animation effects (stretch effects for the first, second, third, eighth, and ninth rectangles in the path). Under Modify: Stretch, in the Direction list, select From Top. Press and hold CTRL, and then select the seventh and 13th animation effects (stretch effects for the fourth and seventh rectangles in the path). Under Modify: Stretch, in the Direction list, select From Left. Press and hold CTRL, and then select the ninth and 11th animation effects (stretch effects for the fifth and sixth rectangles in the path). Under Modify: Stretch, in the Direction list, select From Bottom. Press and hold CTRL, and then select the second, fourth, sixth, eighth, 10th, 12th, 14th, and 16th animation effects (fade effects for the connectors). Under Modify: Fade, in the Start list, select After Previous. Select the eighth animation effect (fade effect for the connector between the fourth and fifth rectangle). Click the arrow to the right of the eighth animation effect, and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5, and then click OK. Select the 10th animation effect (fade effect for the connector between the fifth and sixth rectangle). Click the arrow to the right of the 10th animation effect, and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. In the Direction list, click Linear Down (first row, second option from the left). In the Type list, select Linear. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. Select Stop 2 from the list, and then do the following: Click the button next to Color, and then under Theme Colors click Blue, Accent 1, Darker 25% (fifth row, fifth option from the left). Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Stop position box, enter 71%.

10 Harga dan ketersediaan barang terjamin
Kontrak satuan harga LKPP PENYEDIA SATKER K/L/D/I Harga dan ketersediaan barang terjamin Pembayaran sesuai volume yg dilaksanakan

11 E-KATALOG OBAT Picture-filled text with reflection (Basic)
To reproduce the text effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Franklin Gothic Heavy from the Font list, select 36 from the Font Size list, and then click Bold. On the Home tab, in the Paragraph group, click Center to center the text in the text box. On the Home tab, in the Font group, click Character Spacing, and then click More Spacing. In the Font dialog box, on the Character Spacing tab, in the Spacing list, select Expanded. In the By box, enter 2. Under Drawing Tools, on the Format tab, in the WordArt Styles group, click the arrow next to Text Fill, and then click Picture. In the Insert Picture dialog box, select a picture and then click Insert. Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Reflection, and then under Reflection Variations select Tight Reflection, touching (first row, first option from the left). Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, point to Bevel, and then under Bevel click Angle (second row, first option from the left). To reproduce the background on this slide, do the following: Right-click the slide background area, then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Down (first row, second option from the left). In the Angle box, enter 90%. Under Gradient stops, click Add or Remove until three stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 64%. Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 65%. Select Stop 3 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left).

12 MEKANISME PEMILIHAN Pelelangan Itemized : Satu paket pelelangan, beberapa item barang. Dimungkinkan pemenang lebih dari satu

13 ALUR PROSES E-PURCHASING

14 PPK melihat pada katalog Susun rencana pelaksanaan pengadaan
Sampaikan ke Pokja/PP

15 Aplikasi e-proc lainnya, e-purchasing Buat paket {mengacu katalog}
Pokja log in, Aplikasi e-proc lainnya, e-purchasing Buat paket {mengacu katalog} Kirim permintaan pembelian

16 Aplikasi e-proc lainnya,
Penyedia log in Aplikasi e-proc lainnya, e-purchasing Lihat notifikasi Persetujuan Permintaan pembelian

17 Pokja/PP Sampaikan ke PPK PPK Log in dan input data
Cetak lampiran kontrak Tanda tangan kontrak dengan penyedia

18 Keuntungan E-purchasing
Kemudahan para pihak. kepastian spesifikasi dan acuan harga

19 - - S E K I A N D A N T E R I M A K A S I H - -
Custom animation effects: horizontal scrolling text (Basic) To reproduce the text effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box. (Note: You may want to add a bullet point at the end of your text, as in the example above. On the Insert tab, in the Text group, click Symbol. In the Symbol dialog box, in the Font list, select (normal text). In the Subset list, select General Punctuation. In the Character Code box, enter 2022 to select BULLET, and then click Insert.) Select the text. On the Home tab, in the Font group, do the following: In the Font list, select Gill Sans MT. In the Font Size list, select 36. Click Bold. Click the arrow next to Font Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). On the Home tab, in the Paragraph group, click Align Text Left to align the text left in the text box. (Note: If the text wraps to more than one line, drag the adjustment handles on the text box to widen it until the text fits on one line.) Drag the text box to the left of the lower left edge of the slide. (Note: To see beyond the edges of the slide, on the View tab, click Zoom, and then in the Zoom dialog box, in the Percent box, enter 40%.) To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation. On the slide, select the text box. In the Custom Animation task pane, do the following: Click Add Effect, point to Entrance, and then click More Effects. In the Add Entrance Effect dialog box, under Basic, click Fly In. Select the animation effect (fly-in effect for the text box). Click the arrow to the right of the select effect, and then click Effect Options. In the Fly In dialog box, do the following: On the Effect tab, in the Direction list, select From Right. On the Timing tab, do the following: In the Start list, select With Previous. In the Speed box, enter 16 seconds. In the Repeat list, select Until End of Slide. On the slide, select the text box. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. In the Custom Animation task pane, select the second animation effect (fly-in effect for the second text box). Click the arrow to the right of the selected effect, and then click Timing. In the Fly In dialog box, on the Timing tab, in the Delay box, enter 8. (Note: You may need to adjust the delay time if the length of your text is different than the example above.) On the slide, drag the second text box on top of the first text box. On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, press and hold CTRL, and then select both text boxes. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Selected Objects. Click Align Middle. Click Align Center. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, and then select Picture or texture fill in the Fill pane. Under Insert from, click File. In the Insert Picture dialog box, select a picture, and then click Insert. On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following: In the Shape Height box, enter 7.5”. In the Shape Width box, enter 1”. Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Outline, and then click No Outline. On the Home Tab, in the Drawing group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0%. Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 0%. Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colors click Black, Text 1, (first row, second option from the left). In the Transparency box, enter 100%. On the slide, select the rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align to Slide. Click Align Left. Select the rectangle. On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Select the duplicate rectangle. On the Home Tab, in the Drawing group, click the arrow next to Shape Fill, point to Gradient, and then click Linear Left (second row, third option from the left). With the duplicate rectangle still selected, on the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following: Click Align Right. - - S E K I A N D A N T E R I M A K A S I H - -