PROCEDURE OF THE DOORS ON DOOR FRAME INSTALL WOOD DOORS PROCEDURE OF THE DOORS ON DOOR FRAME

Objectives of learning It is expected that students can explain the various doors on door frame. It is expected that students can explain the size door frame in accordance with the placement It is expected that students can explain the size of doors in accordance with the placement It is expected that students can explain the installation procedure leaves the door correct

Garage door ...

Model of installing the door Swing on door frame Sliding Folded

Door frame size Single door frame : High : 200 – 210 cm Wide : 70 - 90 cm Double door frame : High : 200 – 220 cm Wide : 120 – 140 cm

Size doors High and wide door measured from side to side in door frame outside door frame added 2 times in the door sponing Sponing doors made : 1,0 – 1,5 cm For example: Single door frame : 80 x 200 cm Door : 82 x 200 cm

How many Size of doors ..? Main door : 92 x 200 cm Bedroom door: 82 x 200 cm Toilet door : 72 x 200 cm

Door frame with single door

thick of the door + Verkening What is varkening ? Verkening = additional size Deep of sponing = thick of the door + Verkening function : When the door move, does not look bad When developing the doors, the doors do not scrub the door frame

The installation procedure the door: Preparing the workplace Setting up equipment Prepare materials. Implement appropriate image of the work Once completed return cleaned

Installation Procedure Measure the width and height the door frame Measure the width and height window Crab high / wide to fit Entries on the door frame given verkening 3 - 5 mm Remove the doors and install the hinges, use 2 or 3 hinges in accordance with the provisions Enter the door and give the place a sign on the hinge pillar the door frame Place the hinges on the door pillar Replace the doors on hinges the door frame and match both input and pennya. Try to open and close the door to fit, flat and straight with the door frame

ATAS PERHATIANNYA DIUCAPKAN … TERIMA KASIH

Memasang daun jendela kayu Prosedur pemasangan daun jendela pada kusen

Daun jendela Model pemasangan daun jendela: Membuka keatas Membuka kebawah Membuka kesamping

Daun Jendela Bentuk pemasangan : Jendela tunggal Jendela ganda Jendela mati

Daun Jendela Model/bentuk : Isian kaca Isian panil Isian Krepyak miring

Ukuran daun pintu Sponing pintu dibuat : 1,0 – 1,5 cm Misal : Tinggi dan lebar daun jendela diukur dari sisi dalam kusen sampai sisi luar kusen ditambah 2 kali dalamnya sponing pintu Sponing pintu dibuat : 1,0 – 1,5 cm Misal : Kusenjendelatunggal : 70 x 120 cm Daun pintunya : 72 x 120 cm

Prosedur Pemasangan Daun Jendela : Menyiapkan tempat kerja Menyiapkan alat Menyiapkan bahan. Melaksanakan pekerjaan sesuai gambar kerja Setelah selesai dibersihkan kembali

Kusen tunggal dengan daun jendela tunggal

Perhatikan…! Model kusen dan daun pintu/jendela apa yang banyak berkembang dimasyarakat ? Apa keuntungan dan kerugiannya ?

Anda adalah siswa kebanggaan kami TERIMA KASIH Anda adalah siswa kebanggaan kami Teknologi dan Rekayasa