Presentasi sedang didownload. Silahkan tunggu

Presentasi sedang didownload. Silahkan tunggu

Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc.. Chap 11-1 Chapter 11 Analysis of Variance Basic Business Statistics 10 th Edition.

Presentasi serupa


Presentasi berjudul: "Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc.. Chap 11-1 Chapter 11 Analysis of Variance Basic Business Statistics 10 th Edition."— Transcript presentasi:

1 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc.. Chap 11-1 Chapter 11 Analysis of Variance Basic Business Statistics 10 th Edition

2 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-2 Learning Objectives In this chapter, you learn: The basic concepts of experimental design How to use one-way analysis of variance to test for differences among the means of several populations (also referred to as “groups” in this chapter) When to use a randomized block design How to use two-way analysis of variance and the concept of interaction

3 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-3 Chapter Overview Analysis of Variance (ANOVA) F-test Tukey- Kramer test One-Way ANOVA Two-Way ANOVA Interaction Effects Randomized Block Design Multiple Comparisons

4 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-4 General ANOVA Setting Investigator controls one or more independent variables Called factors (or treatment variables) Each factor contains two or more levels (or groups or categories/classifications) Observe effects on the dependent variable Response to levels of independent variable Experimental design: the plan used to collect the data

5 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-5 Completely Randomized Design Experimental units (subjects) are assigned randomly to treatments Subjects are assumed homogeneous Only one factor or independent variable With two or more treatment levels Analyzed by one-way analysis of variance (ANOVA)

6 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-6 One-Way Analysis of Variance Evaluate the difference among the means of three or more groups Examples: Accident rates for 1 st, 2 nd, and 3 rd shift Expected mileage for five brands of tires Assumptions Populations are normally distributed Populations have equal variances Samples are randomly and independently drawn

7 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-7 Hypotheses of One-Way ANOVA All population means are equal i.e., no treatment effect (no variation in means among groups) At least one population mean is different i.e., there is a treatment effect Does not mean that all population means are different (some pairs may be the same)

8 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-8 One-Factor ANOVA All Means are the same: The Null Hypothesis is True (No Treatment Effect)

9 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-9 One-Factor ANOVA At least one mean is different: The Null Hypothesis is NOT true (Treatment Effect is present) or (continued)

10 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-10 Partitioning the Variation Total variation can be split into two parts: SST = Total Sum of Squares (Total variation) SSA = Sum of Squares Among Groups (Among-group variation) SSW = Sum of Squares Within Groups (Within-group variation) SST = SSA + SSW

11 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-11 Partitioning the Variation Total Variation = the aggregate dispersion of the individual data values across the various factor levels (SST) Within-Group Variation = dispersion that exists among the data values within a particular factor level (SSW) Among-Group Variation = dispersion between the factor sample means (SSA) SST = SSA + SSW (continued)

12 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-12 Partition of Total Variation Variation Due to Factor (SSA) Variation Due to Random Sampling (SSW) Total Variation (SST) Commonly referred to as:  Sum of Squares Within  Sum of Squares Error  Sum of Squares Unexplained  Within-Group Variation Commonly referred to as:  Sum of Squares Between  Sum of Squares Among  Sum of Squares Explained  Among Groups Variation = + d.f. = n – 1 d.f. = c – 1d.f. = n – c

13 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-13 Total Sum of Squares Where: SST = Total sum of squares c = number of groups (levels or treatments) n j = number of observations in group j X ij = i th observation from group j X = grand mean (mean of all data values) SST = SSA + SSW

14 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-14 Total Variation (continued)

15 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-15 Among-Group Variation Where: SSA = Sum of squares among groups c = number of groups n j = sample size from group j X j = sample mean from group j X = grand mean (mean of all data values) SST = SSA + SSW

16 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-16 Among-Group Variation Variation Due to Differences Among Groups Mean Square Among = SSA/degrees of freedom (continued)

17 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-17 Among-Group Variation (continued)

18 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-18 Within-Group Variation Where: SSW = Sum of squares within groups c = number of groups n j = sample size from group j X j = sample mean from group j X ij = i th observation in group j SST = SSA + SSW

19 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-19 Within-Group Variation Summing the variation within each group and then adding over all groups Mean Square Within = SSW/degrees of freedom (continued)

20 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-20 Within-Group Variation (continued)

21 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-21 Obtaining the Mean Squares

22 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-22 One-Way ANOVA Table Source of Variation dfSS MS (Variance) Among Groups SSAMSA = Within Groups n - cSSWMSW = Totaln - 1 SST = SSA+SSW c - 1 MSA MSW F ratio c = number of groups n = sum of the sample sizes from all groups df = degrees of freedom SSA c - 1 SSW n - c F =

23 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-23 One-Way ANOVA F Test Statistic Test statistic MSA is mean squares among groups MSW is mean squares within groups Degrees of freedom df 1 = c – 1 (c = number of groups) df 2 = n – c (n = sum of sample sizes from all populations) H 0 : μ 1 = μ 2 = … = μ c H 1 : At least two population means are different

24 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-24 Interpreting One-Way ANOVA F Statistic The F statistic is the ratio of the among estimate of variance and the within estimate of variance The ratio must always be positive df 1 = c -1 will typically be small df 2 = n - c will typically be large Decision Rule: Reject H 0 if F > F U, otherwise do not reject H 0 0  =.05 Reject H 0 Do not reject H 0 FUFU

25 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-25 One-Way ANOVA F Test Example You want to see if three different golf clubs yield different distances. You randomly select five measurements from trials on an automated driving machine for each club. At the 0.05 significance level, is there a difference in mean distance? Club 1 Club 2 Club 3 254 234 200 263 218 222 241 235 197 237 227 206 251 216 204

26 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-26 One-Way ANOVA Example: Scatter Diagram 270 260 250 240 230 220 210 200 190 Distance Club 1 Club 2 Club 3 254 234 200 263 218 222 241 235 197 237 227 206 251 216 204 Club 1 2 3

27 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-27 One-Way ANOVA Example Computations Club 1 Club 2 Club 3 254 234 200 263 218 222 241 235 197 237 227 206 251 216 204 X 1 = 249.2 X 2 = 226.0 X 3 = 205.8 X = 227.0 n 1 = 5 n 2 = 5 n 3 = 5 n = 15 c = 3 SSA = 5 (249.2 – 227) 2 + 5 (226 – 227) 2 + 5 (205.8 – 227) 2 = 4716.4 SSW = (254 – 249.2) 2 + (263 – 249.2) 2 +…+ (204 – 205.8) 2 = 1119.6 MSA = 4716.4 / (3-1) = 2358.2 MSW = 1119.6 / (15-3) = 93.3

28 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-28 F = 25.275 One-Way ANOVA Example Solution H 0 : μ 1 = μ 2 = μ 3 H 1 : μ j not all equal  = 0.05 df 1 = 2 df 2 = 12 Test Statistic: Decision: Conclusion: Reject H 0 at  = 0.05 There is evidence that at least one μ j differs from the rest 0  =.05 F U = 3.89 Reject H 0 Do not reject H 0 Critical Value: F U = 3.89

29 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-29 SUMMARY GroupsCountSumAverageVariance Club 151246249.2108.2 Club 25113022677.5 Club 351029205.894.2 ANOVA Source of Variation SSdfMSFP-valueF crit Between Groups 4716.422358.225.2754.99E-053.89 Within Groups 1119.61293.3 Total5836.014 One-Way ANOVA Excel Output EXCEL: tools | data analysis | ANOVA: single factor

30 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-30 The Tukey-Kramer Procedure Tells which population means are significantly different e.g.: μ 1 = μ 2  μ 3 Done after rejection of equal means in ANOVA Allows pair-wise comparisons Compare absolute mean differences with critical range x μ 1 = μ 2 μ 3

31 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-31 Tukey-Kramer Critical Range where: Q U = Value from Studentized Range Distribution with c and n - c degrees of freedom for the desired level of  (see appendix E.9 table) MSW = Mean Square Within n j and n j’ = Sample sizes from groups j and j’

32 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-32 The Tukey-Kramer Procedure: Example 1. Compute absolute mean differences: Club 1 Club 2 Club 3 254 234 200 263 218 222 241 235 197 237 227 206 251 216 204 2. Find the Q U value from the table in appendix E.7 with c = 3 and (n – c) = (15 – 3) = 12 degrees of freedom for the desired level of  (  = 0.05 used here):

33 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-33 The Tukey-Kramer Procedure: Example 5. All of the absolute mean differences are greater than critical range. Therefore there is a significant difference between each pair of means at 5% level of significance. Thus, with 95% confidence we can conclude that the mean distance for club 1 is greater than club 2 and 3, and club 2 is greater than club 3. 3. Compute Critical Range: 4. Compare: (continued)

34 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-34 The Randomized Block Design Like One-Way ANOVA, we test for equal population means (for different factor levels, for example)......but we want to control for possible variation from a second factor (with two or more levels) Levels of the secondary factor are called blocks

35 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-35 Partitioning the Variation Total variation can now be split into three parts: SST = Total variation SSA = Among-Group variation SSBL = Among-Block variation SSE = Random variation SST = SSA + SSBL + SSE

36 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-36 Sum of Squares for Blocking Where: c = number of groups r = number of blocks X i. = mean of all values in block i X = grand mean (mean of all data values) SST = SSA + SSBL + SSE

37 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-37 Partitioning the Variation Total variation can now be split into three parts: SST and SSA are computed as they were in One-Way ANOVA SST = SSA + SSBL + SSE SSE = SST – (SSA + SSBL)

38 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-38 Mean Squares

39 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-39 Randomized Block ANOVA Table Source of Variation dfSSMS Among Blocks SSBLMSBL Error (r–1)(c-1)SSEMSE Totalrc - 1SST r - 1 MSBL MSE F ratio c = number of populationsrc = sum of the sample sizes from all populations r = number of blocksdf = degrees of freedom Among Treatments SSAc - 1MSA MSE

40 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-40 Blocking Test Blocking test: df 1 = r – 1 df 2 = (r – 1)(c – 1) MSBL MSE F = Reject H 0 if F > F U

41 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-41 Main Factor test: df 1 = c – 1 df 2 = (r – 1)(c – 1) MSA MSE F = Reject H 0 if F > F U Main Factor Test

42 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-42 The Tukey Procedure To test which population means are significantly different e.g.: μ 1 = μ 2 ≠ μ 3 Done after rejection of equal means in randomized block ANOVA design Allows pair-wise comparisons Compare absolute mean differences with critical range x  =  123

43 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-43 The Tukey Procedure (continued) If the absolute mean difference is greater than the critical range then there is a significant difference between that pair of means at the chosen level of significance. Compare:

44 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-44 Factorial Design: Two-Way ANOVA Examines the effect of Two factors of interest on the dependent variable e.g., Percent carbonation and line speed on soft drink bottling process Interaction between the different levels of these two factors e.g., Does the effect of one particular carbonation level depend on which level the line speed is set?

45 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-45 Two-Way ANOVA Assumptions Populations are normally distributed Populations have equal variances Independent random samples are drawn (continued)

46 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-46 Two-Way ANOVA Sources of Variation Two Factors of interest: A and B r = number of levels of factor A c = number of levels of factor B n ’ = number of replications for each cell n = total number of observations in all cells (n = rcn ’ ) X ijk = value of the k th observation of level i of factor A and level j of factor B

47 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-47 Two-Way ANOVA Sources of Variation SST Total Variation SSA Factor A Variation SSB Factor B Variation SSAB Variation due to interaction between A and B SSE Random variation (Error) Degrees of Freedom: r – 1 c – 1 (r – 1)(c – 1) rc(n’ – 1) n - 1 SST = SSA + SSB + SSAB + SSE (continued)

48 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-48 Two Factor ANOVA Equations Total Variation: Factor A Variation: Factor B Variation:

49 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-49 Two Factor ANOVA Equations Interaction Variation: Sum of Squares Error: (continued)

50 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-50 Two Factor ANOVA Equations where: r = number of levels of factor A c = number of levels of factor B n ’ = number of replications in each cell (continued)

51 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-51 Mean Square Calculations

52 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-52 Two-Way ANOVA: The F Test Statistic F Test for Factor B Effect F Test for Interaction Effect H 0 : μ 1.. = μ 2.. = μ 3.. = H 1 : Not all μ i.. are equal H 0 : the interaction of A and B is equal to zero H 1 : interaction of A and B is not zero F Test for Factor A Effect H 0 : μ.1. = μ.2. = μ.3. = H 1 : Not all μ.j. are equal Reject H 0 if F > F U

53 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-53 Two-Way ANOVA Summary Table Source of Variation Sum of Squares Degrees of Freedom Mean Squares F Statistic Factor ASSAr – 1 MSA = SSA /(r – 1) MSA MSE Factor BSSBc – 1 MSB = SSB /(c – 1) MSB MSE AB (Interaction) SSAB(r – 1)(c – 1) MSAB = SSAB / (r – 1)(c – 1) MSAB MSE ErrorSSE rc(n ’ – 1) MSE = SSE/rc(n’ – 1) TotalSSTn – 1

54 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-54 Features of Two-Way ANOVA F Test Degrees of freedom always add up n-1 = rc(n ’ -1) + (r-1) + (c-1) + (r-1)(c-1) Total = error + factor A + factor B + interaction The denominator of the F Test is always the same but the numerator is different The sums of squares always add up SST = SSE + SSA + SSB + SSAB Total = error + factor A + factor B + interaction

55 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-55 Examples: Interaction vs. No Interaction No interaction: Factor B Level 1 Factor B Level 3 Factor B Level 2 Factor A Levels Factor B Level 1 Factor B Level 3 Factor B Level 2 Factor A Levels Mean Response Interaction is present:

56 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-56 Multiple Comparisons: The Tukey Procedure Unless there is a significant interaction, you can determine the levels that are significantly different using the Tukey procedure Consider all absolute mean differences and compare to the calculated critical range Example: Absolute differences for factor A, assuming three factors:

57 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-57 Multiple Comparisons: The Tukey Procedure Critical Range for Factor A: ( where Q u is from Table E.10 with r and rc(n’–1) d.f.) Critical Range for Factor B: (where Q u is from Table E.10 with c and rc(n’–1) d.f.)

58 Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc. Chap 11-58 Chapter Summary Described one-way analysis of variance The logic of ANOVA ANOVA assumptions F test for difference in c means The Tukey-Kramer procedure for multiple comparisons Considered the Randomized Block Design Treatment and Block Effects Multiple Comparisons: Tukey Procedure Described two-way analysis of variance Examined effects of multiple factors Examined interaction between factors


Download ppt "Basic Business Statistics, 10e © 2006 Prentice-Hall, Inc.. Chap 11-1 Chapter 11 Analysis of Variance Basic Business Statistics 10 th Edition."

Presentasi serupa


Iklan oleh Google